Find experienced local carpenters in Winston Hills

I have assembled an easy shed, I need final installation on an existing cement slab. You are free to make adjustments to existing assembly/slab. Refer to pictures uploaded for all parts assembled, the size of the shed, the cement slab etc.

Re attach wooden verandah with supporting nails.

Re attach wooden verandah with supporting nails.

Need a stainless steel snorkel installed on my Nissan navara d40

The microwave on the countertop fits on the top shelf of the cabinet in the picture (with a longer shelf in place). The idea is to move the microwave to the shelf (thereby freeing up countertop space and convert one of the doors to a horizontal door that hinges towards the floor. The top part with the microwave will remain open so that the microwave can be used with ease.

Need a ply wood under a plastic shed replaced. (With treated pine ) framework is fine. Shed would have to be taken off and refitted. Internal plastic floor that is screwed to ply

1. Supply and replace existing fascia board and flashing to roof extension approx 3.0m long. 2. Install batten trim to underside of eaves approx 2.5m long. 3. Supply and installation of external weatherproof grade decorative cladding to area size approx 3.5m x 500mm, cladding spec TBA by client. 4. Install reveals and 2x decorative screen panels to two window openings on external deck. Materials supplied by client. 5. Other various works TBC.

I will have the slab of wood cut ready to install -Need a joinery installer to Install a floating table shelf for my mini salon measurements-214m from wall to wall. (See pic for example)

Build and install floor to ceiling shelf unit with dimensions 300mm deep, 500mm wide shelves. 220mm apart. Shelves to appear floating like Ikea LACK shelving unit (https://www.ikea.com/ie/en/p/lack-wall-shelf-unit-black-brown-80430591/). I have no idea of what this would cost. Number in budget is just made up but I'd want this to be quality rather than cheap an nasty.

Need to assemble ikea cabinet for a bench top in the kitchen

To repair the roof and front door of a Col Western colourbond garden shed. The damage was caused by an object falling through the roof. Some panels will just need straightening while other may need to be removed, straitened and reattached. End outcome needs to be functional. Access can only be Friday AM (preferred) or Tuesday AM or any time Saturday due to limited access. Shed is in ground level garden.

Looking to build a customised indian temple(mandir) for our home that looks like attached one, preferrably with a om laser cut door and lightings inside the temple. Size to be provided.

This 40 year old skylight is 55W x 85L with a 40mm wooden frame with mitred corners around the perimeter as a trim, and to retain a PVC defuser at ceiling level. The frame has warped slightly possibly due to the heat, and so needs replacing, preferably with something 50mm wide just to cover any damage to the ceiling when the existing frame is removed. Something with a a skirting board profile would be ideal, and smooth and unfinished is fine as I'll stain it later. NOTES ▪︎ the diffuser is only temporarily covered with cardboard to darken the room so that overnighting grandkids can sleep 😴 (see photos) ▪︎ ceiling height is 2.4m (8')

I need few basic cabinets in my home in laundry, garage and bathroom and few drawers in existing cabinets - Due date: Flexible

Require wooden stairs to be built from the backyard verandah to the backyard below. Height is 1.2m, will need advice on how far the stairs need to extend to. - Due date: Flexible

Need a quote for Absco flat pack shed assembly  3.00mW x 0.78mD x 1.95mH  Ezislider Garden Shed - Double Sliding Doors. Planning to have pine planks as flooring ( I can build it)

I got the design and all the parts like the sink and benchtops from IKEA. I also created a separate job for the plumbing, Please kindly let me know if there's a gap between them. the job require: - remove the old sink and the wall tiles(as photo) - cut the benchtop and Cabinet as design, install all the items as design - connect with the washing machines This is for the labour only I can cover all material required. This job need to be done before 11/11

IKEA bench top, assemble the cabinets and benchtop. Assemble ikea storage cupboards - 2 - Due date: Flexible

Experienced handy person who is of appreciation of antiques. We have a 50 year old large wardrobe needing to be dismantled so new carpet can be laid then once carpet is completed will need to return to resemble again. Additional pictures to follow. - Due date: Flexible

Build cabinet around recently installed dish washer - Due date: Flexible