Find experienced local carpenters in Yarraville West

Needing a carpenter to cover the metal beams shown in the photos attached. Please provide a quote including materials. Thank you

Looking for a carpenter to assist with my renovation

Need a carpenter to work with me on building a staircase

Timber swing to be reinforced to prevent swaying. Has always been concreted below but recently started to sway. Was installed 5 years ago.

I need a skilled carpenter for my renovation in Yarraville Framing and fixing to do

Hi. Looking for someone to install blackbutt timber decking. Most of it is on to concrete as shown. I will provide the decking so offer should be for labour and any other materials needed. Thanks

Under Stairs storage cabinet with shaker doors. One photo shows the under stairs areas. The other photo is an example of what l'm after (however, I only require 2 doors)

We need an experienced joiner or cabinet maker to build wooden surrounds for 2 ‘Echelon’ wine racks, install racks and surround into existing cabinetry. - Due date: Flexible

Need 3 small tasks completed 1 - install laminate floorboards in a 700mm x 300mm area. The floor may require packing or concreting for to help level for installation. I have floor boards but may need packing. 2 - refix the kick board to the wall. 3 - relocate side gate. Need to move 5 meters further down the drive way. Depending on how the remove goes, could require additional timber for the frame. Again, happy to our purchase before and during work. - Due date: Flexible

Looking for someone preferably ongoing approx 1 -2 days a week to work with an experienced carpenter undertake maintenance work. Every job will be different and you may want to take this opportunity to learn new skills. Rates will vary depending on hours and job and to be discussed prior. - Due date: Before Thursday, 23 November 2023

Need to build basic cupboard for a laundry space. Approx: L: 700mm W: 800mm H:2000mm - Due date: Flexible

Looking to get some new cabinets made and installed. We are unsure if we will proceed with all 3 areas, so ideally each priced separately. There is a drawing included which we did ourselves showing more detail plus 3 photos showing the various areas, however the general details are also below for initial pricing / interest: General: - All cabinets 16mm thick white melamine - all cabinet doors 16mm thick with laminex polar white natural finish (to match existing) Area A: - 1 no. cupboard - Dims: 600W x 715H x 310D - 1 adjustable shelf - allow for 25mm infill panel to match - installed 1600mm from FFL - hafele salice series 2 hinges + soft close - client to provide handle Area B: - 3 no. cupboards - Dims (each unit): 600W x 1815H x 350D - 10 adjustable shelves (total) - allow for 2 x 25mm infill panels to match - installed 500mm from FFL - hafele salice series 200 push (touch open - no handles) + push door catches Area C: - 1 no. cupboard (installed in recess) - Dims: 790W x 1950H x 330D - 6 adjustable shelves - allow for 16mm shadow gap on 3 sides - hafele salice series 2 hinges + soft close - client to provide handle All dimensions noted are for pricing only - these need to be measured on-site for accuracy. Open to alternative specifications - please advise when quoting. - Due date: Flexible

kitchen timber bench top to be sanded and resealed. The main section is 900mm x 2900mm. There are also two smaller sections. - Due date: Flexible

Existing chest of drawers made from Australian hardwood timber - I think white ironbark/yellow gum. I want to reduce it down from two banks of drawers to one. Then use the left over top for some shelves. - Due date: Flexible

We hav two wine racks that need cabinetry enclosing in a new kitchen. Wine racks have already been sourced and we need them enclosed (construct cabinet surrounding) an installed in existing cabinetry - Due date: Flexible

I am getting my small kitchen & laundry renovated in May and need someone to assemble & install my flat pack cabinetry (purchased from Bunnings). The date listed is approximate, but the job will likely need to be completed in the second week of May. Old kitchen & laundry will already be demo’ed and ready for new install. Plans attached. (The full plans with extra detail will be provided on acceptance of the job.) Thanks a lot! PS, install is cabinetry only. Not looking for benchtop install :) - Due date: Needs to be done on Monday, 8 May 2023

I have two base cabinets to be installed. One oven cabinet, and one cupboard. These are already built. A bit of prep will be required before they can be installed, described below: Pic 1 shows what needs to be removed for the oven cabinet to be able to be installed. Pic 2 shows a small part of the oven cabinet will need to be cut out to fit around the stove top. Jigsaw or similar will need to be required. Pic 3 shows the base cupboard to be installed. Door and knob will need to be put on. - Due date: Needs to be done on Friday, 31 March 2023

*Remove old cabinets without damaging the ones that will be staying (pics of cabinets to be removed). *Build 4 kaboodle cabinets: 1 oven cabinet, 1 base cupboard, 1 base cabinet with 3 drawers, 1 base cabinet with 1 drawer and 1 cupboard. *Install new cabinets. *Move one floating shelf down slightly to fit larger microwave I am available today, next Monday and next Wednesday - Due date: Flexible

We had some booth seating made. The company that made them weren’t able to finish them. We’re after someone who can finish them off in terms of sanding, neatening etc Open to negotiating the $ for this job There are 2 x small singles 2 x large singles 1 x large back to back 1 x small back to back Happy to receive some offers and the chosen person come to see the job and we can adjust the accepted $. - Due date: Flexible

Our cafe/restaurant is looking for a carpenter/educated labourer to build a pergola for outdoor dining area. Yarraville location - Due date: Flexible