Find a professional chandelier contractor in Outer East Melbourne

Need an electrician who can install 50-60kg chandelier and five down lights in void area at 3 meter fall. Ceiling height is 6 meter”. No noggins, only junction box provided. Separate switch point for both.

Need a chandelier to be installed above stairway. It’s approximately 580mm in diameter and the distance from landing to ceiling is approx 3400mm. Junction box and wiring already there just installation required.

Light bulbs on chandelier needs to be fixed

The chandelier in my living room was loose so I took it down. I need to screw and reattach the three wires

I want someone to install downlight for double story, house on stump, no solar power installed yet. - install 13 down lights - 3 pendant lights - 3 medium sized chandeliers - 3 heat lights - 2 exhaust fan - 4 wall lights - wifi cameras already installed, need connection for connection for charging battery - 2 focus lights - external carport flood light etc The price i have asked for here is for 1 downlight supply and install. Above jobs can be negotiated later

Instal small chandelier and heated towel rail

We have 3 chandeliers to be installed - Due date: Needs to be done on weekend - Due date: Needs to be done on Monday, 23 October 2023 - Due date: Flexible

Remove existing chandelier and install new pendant, all inclusive. We have the pendant already. - Due date: Needs to be done on Thursday, 30 November 2023

As stated replace chandelier and install instant heat 3 in 1 - Due date: Before Thursday, 12 October 2023

Need electrician to connect power to 2 chandeliers. Will have scissor lift. Need to use power from two existing lights. Must be Wednesday as that’s when scissor hired. - Due date: Needs to be done on Wednesday, 2 August 2023

3 crystal chandeliers to be fixed in living dining and stair - Due date: Needs to be done on Saturday, 22 July 2023

We are looking for a licensed electrician to replace the existing light with new one - Due date: Flexible

Need a Chandelier Installed please. Replaces an existing light, no dimmer required. - Due date: Needs to be done on Friday, 2 June 2023

I want to hang and wire in a Chandalier Light. The issue is access as its in a Void at the Front Door. Roof height is 6m.. Thus you will need some Mini Scaffholding or a 5.5M A Frame Ladder It comes in sections The first section must be mounted to the ceiling. I've checked and there is adaquete roofing timber in the right place to bolt straight into with bugle screws or something similar. Then the light is assembled by hanging individual strings. There's around 200 individual strings which have crystals attached. In total there's about 30kg of weight but as I said you don't need to carry 30kg. The heaviest piece is around 3kg. The Chandalier is hung in a void in the entrance of my house. The ceiling is about 5.5m from the ground. May need a small scaffold setup as ladder wouldn't cut it I think. Perhaps an A frame that is high enough The light top plate is around 800mm wide. Also need to wire the lights in. Existing point is there just need to remove existing batten light and connect the fom Chandalier to the existing wires - Due date: Flexible - Due date: Before Tuesday, January 31, 2023

I want to hang and wire in a Chandalier. It comes in sections The first section must be mounted to the ceiling. I've checked and there is adaquete roofing timber in the right place to bolt straight into with bugle screws or something similar. Then the light is assembled by hanging individual strings. There's around 200 individual strings which have crystals attached. In total there's about 30kg of weight but as I said you don't need to carry 30kg. The heaviest piece is around 3kg. The Chandalier is hung in a void in the entrance of my house. The ceiling is about 5.5m from the ground. May need a small scaffold setup as ladder wouldn't cut it I think. Perhaps an A frame that is high enough The light top plate is around 800mm wide. Also need to wire the lights in. Existing point is there just need to remove existing batten light and connect the fom Chandalier to the existing wires - Due date: Flexible

Removal of small chandelier over stairwell and insert a new one. Removal of ceiling fan and replace with strip heater in outdoor room. Finish inserting a ceiling fan in bedroom that is already hung. - Due date: Flexible

Connect chandelier to an existing wire and install dimmer switch - Due date: Flexible

Need a sparky to do the assembley and installation of two crystal chandeliers. Chandeliers will replace two existing light bulbs in the Dining and the Guest area. Each Chandelier would weigh between 12 - 15 kgs. Links to the two chandeliers https://www.designerchandelier.com.au/collections/chandeliers-1/products/americana-12-light-crystal-chandelier-antique-bronze-style https://www.designerchandelier.com.au/collections/chandeliers-1/products/maria-theresa-crystal-chandelier-grande-10-light-smoke

There is already a hard wire running Need some one to change my chandelier Attached is my old one

1) A ceiling fan in the lounge needs to be moved to a bedroom and replaced with a Chandelier 2) 4 false-ceiling downlights need to be replaced