Find experienced local fencing contractors in Adelaide

Branch fell on our fencing, needs replacement of infill fencing sheet and rail. Branch has been removed already.

Attaching the posts, as previous Foldaline, to the sleeper retaining wall. The two posts need to be cut to height or possibly pushed into the ground and attached. A drill and four (dyna) bolts for attaching to wall would be required. Then assembly of the Foldaline for attaching to the posts. I have attached photos of the Foldaline and the position for installation.

Time frame: URGENT, quote and instalment needed ASAP (within a week ideal but open to understanding capacity). Material: as per white gate example attached (or similar). Gate needs to be solid/high enough such that dogs cannot poke their nose through or jump over, whilst maintaining visibility from within property. Worker requirement: must have current working with children check or clearance for working with vulnerable people. Location is confidential and sensitive. Photos: the photo with grey fencing is of the space requiring a gate. The gate will go at the entranceway of the enclosed pathway. There are two units with spaces like this (width approx. 1100mm).

Looking for a quote for a gate installation from one side to the other in the photographed area. Have a few other gates around the house that need either re-doing or fixed up and would appreciate a site visit with a proper quote. Purpose is to contain pets into different areas depending on the day. Priority is the photo shown

Old fence post may have rusted underground needs replacing

X6 wooden panels (beech, 18mm thickness, 1200mm length) need to be cut into halves (vertically - 1200mm length cuts)

Remove old lattice that is coming apart. Source and install something similar to what is there now. 3 panels each approx 2.4m x 1.8m.

Electric gate post concrete base broken. Repairs to fence hardiflex panels.

2 iron gate panels = see photo weld both sides of gate together to create a single gate ; install as a sliding gate on concrete track - ready for automation

Request for Collection and Delivery of Temporary Fencing Panels We need assistance with the following: Collection: Approximately 6 temporary fencing panels from the CBD (temporary parking available). A few additional panels from an address in Wayville. Delivery: All panels to be delivered to 9 Thomas Street, Pooraka, SA.

To help me l will work with you

I need someone to come and fix the front gate post which has come loose from the ground. Cor-ten steel gate post rusted through at soil level. Post needs to be reused not replaced as it was specifically made for the gate

Handyperson needed to help close off gaps along a retaining wall and bottom of the fence to keep my cats from escaping their enclosure. Not sure what materials are needed but you would need to supply them.

see photo iron gates I will have gate already hot dip galvanized / powder coated; i am looking for tasker to weld both sides of gate together so as to be able to create/install sliding automated gate (rather than swing gate); there is ample room for sliding gate to move. There is access to power supply at gate site. In summary seeking welding of gate components then install automated sliding gate on new track . Likely will require medium heavy duty (good quality) gate motor

The Emu wire fence needs painting and timber posts re concreted or secured

Rear fence is tilted towards rear house.

I need a Stratco gate installed. Have all the parts, gate and steel poles. It’s about 800 mm wide, and needs the pole bolted to concrete and then the gate latch on the brick wall on the other side. Or, could go in reverse: gate attached to the brick wall and the latch on the steel pole near the fence. No time waste is please, need someone qualified.

About 2 inches needs to be cut from 6 foot tin fence, on both sides(includes metal railing)

Assembly and install of a stratco ezi-slat carport gate with self latching walk through gate on one side. Will need to cement in three posts, cut blades (just a single cut for each) and put it all together. All stratco parts and fasteners are ready and on site. Images are of the space between the house and the property line fence where it will be installed with the gate drawn roughly in blue and fence posts in red and of a similar example of what it will look like from the internet. Space is 3.6m wide and gate will be 1.2m high. You'll need your own insurance and all tools and materials outside of what stratco provided. Soil is rock and clay.

Wireless keypad was knocked off gate and needs to be reinstalled