Find a professional computer hardware technician in QLD

I need to set up a Nano Pi at my home address. I need to be able to log into any computer at any other location (via Amazon or Binary Lane) and have it appear as though I am accessing a web site from my home address.

Connect on site, hardware issue. Network connection issues.

Expert pc builder to upgrade mobo,cpu, ram from am4 to am5. Done here at my house. I have all of the parts. Obsidian 1000D case. Absolute breeze to work on. Need to be knowledgeable with hardware and software. Ie over clocking gpu, undervolting cpu etc. I know what I'm doing I just have a physical disability and have lost the use of my hands. Comfortable, adequate workspace in my home to complete this job. Professionals need only apply. Have pride in your work with able management, no shortcuts, etc. Look after my system and I'll look after you withi an hourly rate we can negotiate.if your'e in towards Brisbane, ill even pay you travel. When you message me I'd like to know your prior experience and skillset. Thanks

PC won't boot, unsure if motherboard or PSU - Due date: Flexible

I'm not savy enough to do this but we need to connect a piece of hardware to our network. I need to know what we need to get (if anything ) and how to do it. The device to connect is a Cuddon FD-80 Freeze Dryer and we have a Telstra NBN modem in our office. Attached are the instructions form the company - Due date: Flexible

I’m hard ware banned on a video game and need someone to spoof it or something to make me able to play it again I may need a new ssd or something - Due date: Flexible

Having recovery issues (blue screen of death). 2 RAM slots are faulty Possible SSD issue Install - Motherboard CPU GPU Ram Power supply - Due date: Needs to be done on Monday, 30 October 2023

the fingerprint scan isn't working , it seems like the hardware is broken as it doesn't detect any fingers

Computer is turning on but not displaying to the monitor and occasionally makes an odd clicking sound. I was after help with diagnosing the problem (?gfx card) and advice on options to fix it. Bringing a spare gfx card to test may be helpful. - Due date: Needs to be done on Thursday, 9 March 2023

My GPU will be fine running at normal temperatures idle and then will go above 100*c after about 4-7 minutes (still idle or minimal load tasks). I just repasted my GPU and I cleaned it thoroughly, no dust with the same results. So I’ve narrowed it down to either being my GPU or PSU being faulty. I need someone who has a test bench or even just a regular PC that has a PSU of at least over 900w, 3 x 6+2 GPU cables ready and a hardware monitor software installed (preferably HWmonitor) to test if my 3090 needs to be RMA’d. I could just submit both through for warranty, but then I pay for freight and labour on both when only one is faulty I’m pretty sure. By putting my GPU in someone else’s PC, if it still overheats then obviously that would be a great argument when I submit an RMA ticket to the supplier.

I need help with my MacBook Pro, I feel like I have background issues and my network is being used as a local network and it feels as though someone is hacking me - Due date: Flexible

Realdash software working correctly on a SBC that will be run in a car. (Already exists with some guides) The SBC must be fast and capable of booting in under 10 seconds or as close as possible. A Canbus and GPS adaptor installed on the SBC with data working on the Realdash SBC. This can be hat or usb but compact is desirable SBC will be connected to a Battery bank that is then charged by the Automotive car power system. The SBC may be put in Sleep mode. I would prefer if the sleep time was more than 7 days it shut down. Wake from sleep would be very quick. Requires understanding of hardware (and suggestions on selection and purchase) SBC (does not have to be Raspberry Pi happy for something more powerful) GPS on Linux Canbus adaptor working on Linux Sleep and wake modes Software Requirement Understanding Linux Understanding Realdash software (yes this is in development phase on Linux) https://www.realdash.net/forum/viewtopic.php?f=5&t=1412 data feeds into Realdash from GPS and Canbus to feed correct data high speed polling to ensure data is current eg Tacho. Happy to have a chat on the phone. This is a fun project that I just don’t have the expertise to do. All development code and configurations are to be owned outright by me. - Due date: Flexible

My computer is getting slow. So I want to buy hardware to upgrade my PC. My PC is not really bad so I do not want to buy everything again. Want to keep things if I can. I need someone who can suggest me to buy hardware and personally install it. - Due date: Flexible

Cronus Zen install and set up for M&K PC: Correct installation and upload of scripts in order to play warzone. Need someone to show me in person how to install and use correctly without fault.

Unbuntu Expert required on site to transfer files from existing to new Server Hardware. This must be done onsite (not remote) as remote access is not available and root access is necessary. The current server cannot be upgraded due to a software fault and a new server has been set up and configured as a fresh install. The server config has been restored from a DC configuration backup however just need user files and permissions copied over. Should be relatively easy using 'rsync' or similar as both machines are on the local network however my ubuntu skills are a little basic. Nothing is required to be done except move the existing mail files from one machine to the other.

Unbuntu Expert required on site to transfer Zentyal Domain controller config & mail files to new Server Hardware. This must be done onsite (not remote) as remote access is not available and root access is necessary. The current server cannot be upgraded due to a software fault and needs to be moved to a fresh install. Should be relatively easy using 'rsync' or similar as both machines are on the local network however my ubuntu skills are a little basic. Zentyal skills not required only command line ubuntu. The server config and AD tree was backed up and the config restored onto a duplicate server. Nothing is required to be done except move the existing mail files from one machine to the other.

We have a customer feedback-capturing device setup in 2x 7 Eleven stores in QLD (7 Eleven - Tingalpa North and 7 Eleven - Warner Lakes) that need a stand replacement. We will be couriering you the hardware that you need. We need someone to go into the store, talk to do the needful professionally, make sure the hardware is up and running again, and report back to us. I’ll give you more details after the offer is accepted.

We have a customer feedback-capturing device setup in 7-Eleven Tingalpa North(QLD) that needs a stand replaced. We will be couriering you the hardware that you need. We need someone to go into the store, talk to do the needful professionally, make sure the hardware is up and running again, and report back to us. I’ll give you more details after the offer is accepted.

We have customer feedback-capturing devices setup in 5x 7-Eleven stores in QLD (Bellbird Park, Ashgrove, Kedron , Dakabin, and Rothwell) that need stands and charging cables replaced. We will be couriering you the hardware that you need. We need someone to go into the stores, talk to the store manager/staff, do the needful professionally, make sure the hardware is up and running again, and report back to us. I’ll give you more details after the offer is accepted.

We need to find someone who can set up the POS system: hardware & software from https://squareup.com/shop/hardware/au/en/pos-kits The shop is located in Hervey Bay, Torquay QLD 4655. The installation date can be flexible upon your available time.