Find experienced deck builders in Melbourne

Old boards need to be removed and new boards fixed to the large storage surface. You will need to purchase and cut to fit the space. We have composite boards on the deck that need to be colour matched to the area that needs to be repaired

I’m looking for a skilled tradesperson to extend my monument colour composite decking on the left, right, and back up to the fence line. Extend decking to the fence line on all three sides. Replace one or two broken panels at the back. Cover a cut-out section on the right where a palm tree was removed. Supply all materials, installation, and clean-up after completion. Measurements can be provided if required.

Need a quote anf meaure for composite decking install. Balcony low profile deck to be installed using a steel frame over tiled. Happy to get material myself once you tell me what you need amd happy to assist!

Need to do decking at side alley. Dimension roughly 9M x 1.4M - Due date: Before Friday, 27 October 2023

Existing Tiled Veranda Needs installation of composite decking with picture box frame on-top of he tiles. Size is 1.4 depth, 5.2 width. All materials supplied by me. Flexible timeframe - Due date: Flexible

Removal of old timber decking and replacing with new composite decking. 4.1m wide by 2.7m long approx. Decking material not supplied and to be concealed fixed between boards.

Develop a scope of work and a material list for the following:-Remove dispose of and and replace existing decking boards on first floor balcony. Also remove and dispose of 2x planter boxes situated along northern edge of the deck. Decked area measures approximately 5M x 4M x 3M. Material to be used is Merbau 90mm planks with 2 x stainless steel decking screws into each floor joist. A protective membrane is to be installed atop each floor joist under the decking boards. Existing BBQ to be reinstated in existing location.

Wooden planks are slanting on one side , needs to re-positioned. Some planks need to be replaced due to wear and tear

Sand and oil an outdoor deck (approx 4 metres by 4 metres)

We have a large (4m x 2m) tiled north facing balcony on our apartment, which we’d like to have someone put together and lay a floating deck of composite timber. Can be free standing/not attached to the walls or tile. Looking for someone with experience laying a deck/carpenter.

3rd floor apartment possibly 2 coats required

Timber decking and wall needs to cleaned with high pressure sprayer and oiled . See pics attached for size

Cleaning and oiling timber deck - intergrain ultradeck Merbau. Approximately 2.5m wide by 13.5m long

We have 20 untreated timber deck boards between 2.5-3m long to be cut up into approx 50cm pieces.

Sanding of timber deck. Photos provided. Entry from laneway and across flat surface.

Sanding of timber deck 33 square metres

We have a 3m x 4m timber deck (less a small bit where stairs / gate access is) which was used as site for builders storage during a recent renovation. Seeking a general deck service - namely a sand back and oil of the timber (to remove residual marks/paint from builders) and unblocking of any caught items sitting in gaps. Access to external power and water / hose in deck area if required (soil underneath deck with good drainage so water use OK). Oil and sanding equipment not provided so please include in quote (or be specific if it excludes and the materials can be reimbursed separately). Tasker should have prior experience in servicing decks. Note: building rubble in first 3 pics no longer there - current status is per pics 4 & 5 (a few items to be moved before service).

Richmond, Victoria. Existing Timber Deck (weathered and grey with some mould areas)to be sealed. Front Porch 12m2. Back 25m2 + benchseat/planter. No access issues.

We have a small outdoor ground level courtyard, off the dining room, which is currently tiled with synthetic grass over the top. We would like a timber deck built over the tiles to raise the level to close to the door height. Size: 4100 wide x 1800 deep x 100 high mm

To visit site first, then purchase and source correct timber to matching existing and remove and patch to make good on decking area.

Painting and staining of timber Deck. Approximate size is 8m x 5.5m.

There are three decking areas as follows: 1. Large area - approx 6.3metes X 2.5 meters 2. Small sized step 3. Middle sized step ALL SHOWN IN THE PHTOS Need to be sanded and stained properly There are some timber panels on the large deck areas that need to be screwed back down again as they are coming back up. See the photo Please give detail with your offer of how many coats you will apply and anything extra you will do. Need someone with good eye to detail Airtasker please supply the stain and materials

Timber deck needs to be re stained. I’m Indicative dimensions: 2.3m x 9.8m [bench seat also required]. Due date: As soon as possible

- Install timber substrate and hooks on plaster wall - Sand and seal outdoor timber deck and bench seat - Repaint outdoor waiter's station (black paint) and remove bifold door hinges - Refit step safety strip - Reattach 2 x stainless steel shelves to brick wall - Due date: Before Wednesday, 31 January 2024

I have several lengths of timber decking (6m the longest, and there are four of them plus possibly some other smaller bits) that I need cut down and disposed of. It'll take 10mins max once you're setup with your sawhorse and circular saw. Please include cost of removal. - Due date: ASAP - Due date: Flexible

I have several lengths of timber decking (6m the longest, and there are four of them plus possibly some other smaller bits) that I need cut down so I can dispose of them (you can even take them if you want!). It'll take 10mins max once you're setup with your sawhorse and circular saw. - Due date: ASAP