Find trusted local electricians in Ascot

Need couple of down light in my dining room

cables for chair are cut and lost

Chandelier installation x 2

Need to replace 3 pendant lamps with new ones

I have bought a new 60cm oven to replace an old oven (66cm x 56cm). The cabinet will need adjustment to fit the new oven. The current cavity is sized to the oven. Will need to connect the new oven and if possible take the old one away.

A light fitting has been removed from an elevated position approx 3m. from the ground, under roof eve. A short length of electric wire remains dangling. Needs a new fitting or at least a proper junction box.

Hi, We require 2 wall lights to be installed by a licensed electrician. I've attached two photos which show the type of light, and also the location of installation. The lights will be installed around 3m off the ground. A standard ladder can fit into this area safely. There is also an existing light switch (you can see in the photo) that we need both lights wired into. The '$5' budget for the task is just a placeholder. Please nominate your own proposed fee. Thanks!

Old light needs to be dismantled and a new light to be installed in the bathroom - Due date: Flexible

I have 3 x single chairs, a park bench , 2 x Adirondack chairs and a small side table that need slight repairing and gerni to clean up please

Moving back into our house after a renovation - NBN not working and probably not set up properly. - Due date: Needs to be done on Friday, 10 March 2023

I have a dodgy wall socket that needs to be replaced and a ceiling fan needs a new light bulb (I have no idea how to take the cover off and change it myself) - Due date: Before Thursday, 1 September 2022

The water heater's circuit breaker keeps tripping. Need an electrician to come and get it fixed. Heating element / thermostat might need replacement.

Hi I'm after some quotes on either replacing an electrolux Kelvinator air-conditioner that isn't blowing cold air, may need rewiring & regassing along with a compatable universal remote Or details on where to purchase remote. Thankyou

There is already OPTUS NBN and OPTUS NBN modem in the main house on the property. Need to extend the NBN cable from main house to granny flat. And then add a NBN wall outlet to the granny flat and add an NBN modem to the granny flat. This is needed because I may need to work from home (phone call centre work) and my company may not accept wifi to granny flat because of possible call drop outs using wifi. So need a fixed NBN cable line in granny flat, with a cable going from wall socket in granny flat to a NBN modem in granny flat, and then a cable going from the modem to my computer. So that this will satisfy my employer requirement of a fixed NBN cable line in the granny flat. I have spoken with OPTUS and they are ok with me contacting a private NBN electrician to do this work. - Due date: Flexible

Need a licenced electrician to replace two lights in my pergola with batten lights. Have got the lights. Also need a double powerpoint installed on the pergola's wall. Got the powerpoint as well. - Due date: Needs to be done on Sunday, 26th Dec 2021

Hi looking for someone to inspect and replace lightbulb in 2 fans and replace dichroic bulb in kitchen.

Currently have an induction cooktop, have purchased a gas cooktop that we need installed & connected up to an external gas bottle. Distance from cooktop to outer wall is approximately 40-50cm. Photos (will add asap), show parts and area in kitchen etc but pls ask any questions required to provide a more accurate quote.

Hi we need a new tv aerial connection the photos show how useless we are at replacing the old one

I need a power point replaced in bathroom. Can get photos if needed. It’s has to point and a light switch. Weekend or after hours would be good. Will pay for materials as well

Need a licensed experienced electrician to: o Run the power and data conduits & cables in the walls’ cavity to the roof and connect power to the main at the back of the house. The cable work in the front fence has been done already and connect to x2 junction boxes on the front wall of the building. o Install / connect the fence x7 Up-Down LEDs. 6 wall plates have been already installed. I will provide the lights. o Install / connect the x2 two-way 3-gang light switches indoor and outdoor. I will provide the switches. o Install the required circuit breakers in the meter box on the front fence. I will provide the circuit breakers. o Connect the already installed x2 power points in the meter box. o Install x1 powerpoint in the fireplace cavity. I will provide the powerpoint. Other small consumables (conduit, cable etc) needs to be provided by the electrician.