Find an experienced fence painter in SA

Preparation, primer and fresh coat required for metal front fence railing and gate, metal eaves, balcony railing, wooden front door.

60 Timber Slats (Fence Panels) need to be painted - 2 Coats on each. Have all the paint and rollers, just need someone to do it.

Neighbourhood fence colorbond 2.1 mtrs high with plinth to be done. 21 mtrs

brush fence repair replacement

Paint or spray 10 panels of small tin fence in Monument one side only

To paint a metal fence around 40ms lenght (charcoal)

Has not been re done for 2 years, needs a good sand , then a deck oil applied on surfaces of all the wood in the photos. The pool is only quite small

Want a white picket fence with one gate in front of our house - approx 11m

Looking for someone to paint out back fence in monument. We painted the other side last year but looking to get someone to do the back fence for us now. The plants in the pics will remain so need to push them forward to get down as well as you can behind them. The fence is about 4foot off the ground I have ladders you can use if theat helps. Nominally 15 metres wide to be painted. Contact me with any question you have. I will need a tax invoice for the works completed

Paint external metal fence. 2 coats Paint supplied Back 5x2.2m Side 8.7x2m

Need a front fence painted in colourbond monument

I need a fence on both sides of house and at the front I would like advice

Supply and fit new brush roll top to 6.5 meters of fence.Remove old roll top prior to fitting new .owner to dispose.

Need just the visible part of the fence painted dark colour.

Fences from side of house to footpath (about 10m) on both sides of house. Starts at 2m high and tapers to 1m. One fence in good condition the other needs to be treated for rust at the bottom before repainting. I’d want you to brush off the rust first and purchase and apply a rust treatment, primer and paint.

picket fence cleaned back and front

Brush fence needs repairing along top. Approx 14 meters long. Can potentially supply materials or tasker to source their own.

Seeking for painting of a fence roughly 25m length - prep required e.g. clean, sand prime Price not set

I have bought a picket fence / gate / timber for a new front yard fence. I need it painted to a high standard (2 coats) before the installation. The fence (including gate) is roughly 15m long In total: - 140 wooden pickets - Picket Gate (with 9 pickets) - 5 x 2m wooden posts - 4 x 6m wooden rails ✅ Paint is supplied ✅ Rollers and tarps supplied ✅ I have already done the first coat of paint on 110 of the pickets (one side of them) Looking for somebody to finish the pickets 1st coast of paint, And then give all of the timber/pickets 2 coats of paint The 5 posts will need to be sanded before painting (I can provide electric sander) I’m outsourcing this part of the job to ensure a quality finish, as we want the fence to look great. If anyone is interested in doing the installation I will be hiring somebody for that job also after this Open to doing a paper in hand arrangement

Oil wooden slat fencing. About 15m total of fencing, about 2.4m high. Victoria ash/ silvertop ash hardwood. Installed 2 years ago and in need of oiling. I have purchased the oil. Budget negotiable as unsure how big a job it is. Light sand, wash, then 2 coats of oil needed .