Find an experienced fence painter in Sydney Eastern Suburbs

Hi - Keen to get some quotes to paint a Navy Blue Colorbond fence White. There are 13 panels. Each panel is about 2.3m x 1.8m. Must have experience in painting Colorbond. Let me know, Cheers, Dave

We have two side fences, rendered wall, a small picket fence and rendered wall around a window that we need painted prior to 27 November. Ideally, between 19 and 24 November.

Need a painter to help finish painting my fence. My husband has done the undercoat. We will supply the paint.

5.5 metre fence needs to be sanded, rustproofed and painted black. The gate needs to be reattached to the wall as it has been removed for paving. You supply the paint so please include in your pitch. Thanks

Multiple tasks - fence, gate, patio posts - I’ll supply paint/brushes

Paint aluminium gates Paint lap n cap fence Front stairs Around garage door Colour- monument

Fence painting (timber about 45m long)

Spray paint timber fence in monument grey colour

Stain 40m length fence, 40mm posts with 12mm gaps, 1800mm high. One side only, some sanding required.

Have a garden fence that is weathered and needs sanding down and repainting

Hang 3 pictures on a wall. Paint fence, paint will be provided

Replace rotten timber in existing masonry front fence/wall. The existing timber to be removed and replaced with a new piece (you to supply timber) and fitted into wall. Timber to be painted to match existing (paint provided). Please also include to paint the other two existing timbers also with a fresh coat of paint for a consistent finish. Timber is approximately 2 m long. Parking immediately in front easily accessible. Work can be carried out at your convenience, no access constraints.

Only a couple years old but fence needs sanding and lacquer to look fresh.

seeking a reliable and experienced individual to prepare an old front picket fence for painting. The fence is approximately 8 meters long and requires thorough sanding and paint stripping to ensure a smooth surface for the new coat of paint. Key Responsibilities: Sand back the entire length of the 8-meter picket fence. Strip any old, flaking, or peeling paint from the fence. Ensure the surface is smooth and ready for painting. Clean up the work area, removing any debris and dust created during the sanding and stripping process. Inspect the fence for any damage and report any issues that may require repair before painting. Requirements: Experience in sanding and stripping paint from wooden surfaces. Knowledge of appropriate tools and techniques for preparing wood for painting. Attention to detail to ensure a high-quality finish. Ability to work independently and efficiently. must have their own tools

Strip back and paint the fence and gate metallic black paint with an undercoat and rust proofed. 5.5 metres in total.

We have moved into a new home a few months ago. The front fence is clearly rotting in places. We believe the previous owners had it treated for white ants but we are not sure if the problem was fully resolved. We don’t want a full house inspection; just someone to look at the fence in a relatively quick job.

Re-render edges of concrete fence for a clean finish that can be repainted

We have a newly installed timber double lapping fence 1.8m high and 20m long We need help staining this fence in black Japan on 1 side of the fence. This would require 2 coats This includes labour and materials The picture of current state vs. future state in images.

Rear fence and render / concrete walls to be painted. I know the colour and have the paint code - want someone to do a double coat (needs to be a proper job)

Painting one side of a 25m fence that’s 1.8m high. Fence is made up of pressed concrete panels - https://modularwalls.com.au/product/slimwall/ Paint will be supplied