Find a fence installation professional in Albany Creek

Remove and replace 2 x fence posts

I have vines growing on my back fence thst the neighbours aren't keen on. I wish to I stall a barrier to this to prevent vines going past my yard. I have fascia supports which have a small angle yo be attached to the fence supports. Then polycarbonate sheets are yo be screwed to these supports. The fence is high in one area. It is a 2-person task.

Need to fix my fence with a new one.

Hello My neighbour and I have an 18m long lowest timber retaining wall and timber fence on the boundary line. Both are rotting and need to be replaced. I want the retaining wall to be replaced with concrete sleepers and the fence to be replaced with a new timber fence. Fence is approx 1.8m high. Open to quotes.

Replace a timber fence, 9 mts long 1700 high with a 800 high retaining wall, great access and I will remove old fence and retaining

Remove and replace 6m timber back fence, install 2 side gates, side gates approx 1.9m and 2m each, back fence 6m - Due date: Flexible

The gate length 1m and slate panel - 0.6m. Providing all the Materials. Looking for someone to come and do the installation. - Due date: Flexible

We are wanting to add privacy to our courtyard by topping our timber fence with a trellis for climbing vines. After a solid but simple timber frame (treated for outdoor use with no weather protection) secured to the fence, and all the way too the ground to ensure best support & no fence sagging under pressure over time. Hoping for a quote with wire for the trellis part, and another for timber. Fence is 180cm tall and needs another 53cm to be equal height as shed. Frame/trellis to be approximately 4m long. I have attached 2 photos to show what we are after, and the third picture is the yard and where we need it constructed. - Due date: Flexible

Remove old fence supply and build new fence 20mtrs long 150 high - Due date: Flexible

Side Fence needs replacing, part of the back fence needs replace and two side gates, tree stump will be removed, will need split quotes for neighbours - Due date: Flexible

Measure & replace existing timber with aluminium powder coated slats on 2x side front gates - Due date: Flexible

Hi. Installation glass pool fence 20 m long - Due date: Flexible

I just had a timber pergola thing cut down from the front of the house. There are brackets left (9)that are riveted in to metal under gutter that need them removed (see picture). I also then need the area puttied up and prepped for painting. I will paint myself. I also have around 8 timber fence palings replaced on our side fence too. (See picture). I will supply and paint palings. - Due date: Before Wednesday, 9 November 2022

40-45m colorbond fence supple and install. .8m x 19m x 19m with small gate and side access gate 1.4m (roughly) Short run from side of garage to boundary, long run to rear, long run across rear with gate, plus side predestrian gate 1.8 high, unsure of profile and colour. Reasonable level - Due date: Flexible

Installation of a 1.3m side slat gate (including providing lock, latch and posts), in a circa 1.5m wide space. We have the gate already to go. - Due date: Flexible

Looking for a quote to supply and install a privacy fencing on the back yard of our property- possibly with 3 gates. Interested in overlapped wood picket design or maybe PVC. - Due date: Before Friday, 10 June 2022

I have a pool fence that requires 3 new hardwood posts as the existing post are rotten and the pool gate doesn’t close correctly. The quote needs to be supply and install and remove old posts. The most important thing is that the gate closes itself so it’s complaint. - Due date: Flexible

build a 2.1m high colour bond fence of 5.5m length with a 1 m gate for the pool. Which would be 4.3m fence with gate up to the retaining wall and joining it with another 1.2m fence on top of the retaining wall which is .8m high. - Due date: Flexible

Need someone for 8 hours who is Ok with using a lightweight electric jackhammer and hand held petrol auger to dig holes for the fence posts. Holes aren't that big because only using 40mm x 40mm galvanised RHS. Also a small trench must be dug for the wire to sit in. Removed the old fence today and the ground is not that tough actually, mostly just dirt.

I need roughly 18m of pool fencing installed above my retaining wall. I have the fence and posts and a few fittings. I have attached pictures to with the fence layer out in position.