Find a fence installation professional in Burwood VIC

Current side fence needs to be partially rebuilt. Including removal of old. Aprox 8m long. 2m high with drop at front: See pictures for measurements. Harrison ave Burwood. - Due date: Flexible

Timber fence to be installed 15-20 meters. 1.9 high

I require a qualified fencer/carpenter to build a front fence. The the frontage is 7m with two, 2m side fences. A gate is also required. The style of the fence is a shiplac/tongue and grove fence (cement sheeting can also be used). - Due date: Before Wednesday, 21 February 2024

I need to replace an existing timber fence with a 1.8 metre high colourbond type fence sitting on 200 mm sleepers, that matches the existing one shown in the photos. The length is 6.6m. - Due date: Flexible

We need 20m of 1.65m high fence and 20m of 1.95m high, all together 40m of normal wood fence in total. And removal of the old ones included in the price. - Due date: Before Monday, 20 March 2023

Need to replace my backyard timber fence (height: 1.95m, length: 17.5m). Need supply of materials as well. Share bill with council. Need to have Public Liability Insurance (PLI) to the minimum value of $10,000,000. - Due date: Flexible

45m - Standard lap 1950h, 3 rail paling fence treated pine including sleeper Concrete, Bugle screws, Delivery, Removal of exisiting fence Price includes demolish and removal of old fence Must be an experienced fencer Needs to be available over the next few weeks Weekend work might be ok

Would like to replace the fence with a taller one up to the bricks

Need help installing a new hard wood post on our existing paling fence. New post need to be supplied/installed/set full conrete

I require an experience fencer/handyman/carpenter to build a front shiplap (tongue and grove) style fence. The fence is approximately 7 metres long with, a gate in the middle. I would really appreciate if someone could provide a quote with the view to having the fence built within the next 8 weeks. - Due date: Before Wednesday, 27 April 2022

1970s strata title unit. 10 metre section of fence requires dismantling, existing bricks cleaned, narrow footing poured then fence section rebuilt. Fence is 5 bricks high with a capping brick. Can provide detailed pictures and provide address so you can accurately assess. Many thanks - Due date: Flexible

I need someone who have the right experience and can install metal fencing panels. In consultation we can then order the panels/posts, & fittings, which may take 2-3 weeks to be delivered. The length is approximately 13.2 meters long and if the 2.2 m panels are available, then may require 6 panels and 7 posts, including a letter box affixed to the last post next to the driveway. - Due date: Needs to be done on Saturday, 5th Mar 2022

I need a sliding fence built where there is a current wooden fence - It basically needs a metal frame and something for the fence to sit/slide on. Ideally, you'd use the same fence material for the face of it. - The gate would be about 2m wide. - Due date: Flexible

My existing fence is broken and need to replace the fence. Appoximately 8 to 9 meters - Due date: Flexible

We need fence extensions to be sourced and installed in backyard, (around 5 to 6 extension panels needed). - Due date: Flexible

Build up 1.8m timber fence on the boundary. Burwood site, total about 40m. Unit1 retaining wall will be finished next week. Unit2 fence need to remove.

I need to get replaced the front existing wooden fence with a new one.

Install framing on current fence. Attach screens on frame. Timber and screens ready for installation.

Need replacement timber fencing to both sides of my house. Different heights from 3ft (small amount) ramping up to 9ft (majority) One side around 25m and the other around 35m. Both neighbours on board and ready to go asap

Any Handymen/woman I Need a simple Picket fence gate for my driveway built. Measurements Circa 3380L maybe 1500H Appreciate low cost quotes nothing fancy mainly to keep the pets in and a bit of security for the house.