Find a fence installation professional in Camberwell VIC

build new retain wall surrounding the house ,around 71 meter in total,including left boundary 32.5 meter, back boundary 15 meter, right boundary 23.5 meter . Build 3 layers, timber sleeper 200mm x 75mm x 2400mm. Steel bar post. Agi pipe connect to drainage and backfill if necessary.

19m of fencing needs replacing, looking for ColourBond See attachments.

Looking to have kit carport (steel) installed, including footings etc. we supply kit.

The fence on the right side of the house has cracks and is bent to one side and needs to be repaired or replaced.

Build a 1.8m timber paling fence (49m) - Due date: Before Friday, 24 November 2023

Looking for someone to pick up lattice and materials, and install on a fence. Length is 3.6m and height is 1m. - Due date: Flexible

Supply and install pool fencing or similar to replace existing balustrade on front balcony. Preference is for tinted glass. Needs to be compliant with planning rules - Due date: Flexible

Gate 1000 (w) x2400(H) and 500(W) x 2400 fence. Gate post to be attached directly to brick house, and fence attached directly to existing fence and onto swimming pool deck. Sugar gum slats to be vertical with less than 10mm gaps. Must be Pool Compliant, so must include maglock Not urgent - Due date: Flexible

Our back fence has a couple of posts that have rotted through which need replacing. We don't want to replace the entire fence due to the mature garden - Due date: Flexible

Need repairs to pool fence/replacement to make it compliant. - Due date: Before Tuesday, 1 November 2022

Remove and replace 2x house side access gates. On the left hand side (see picture 4), we have a 0.95m gate within a wider 4.35m of fence (incl gate). The gate/fence connects our house wall to the boundary fence - we will need both the gate and fence removed and replaced. On the right hand side (see picture 1), we have a side access that is currently blocked off. The width is ~1.3m. We need this removed and replaced with a gate (with a bit of fencing on the side if required). Design of the new gates: we would like the new gate/fence to be ~1.7m tall and have a similar design to picture 3 (slight gaps between the timber planks). We would also like both gates to be lockable - e.g. picture 2 - Due date: Flexible

Looking for someone to pick up lattice and install on a fence. Length is 3.6m and height is 1m. - Due date: Flexible

We need a gate built and attached to the side of our house. Needs to be secure and attached between the house and fence, but not super concerned about what it looks like.

We have a hutch. We just need a chicken run built with fox/dog proof fence and gate. Covered. Roughly 5 x 10 meters. There is already fencing on one side. - Due date: Before Wednesday, 30 March 2022

Install new picket fence with automatic gate - Due date: Flexible

See above - long boundary fence between 69 and 71 Through Road needs assessment and a quote for repairs or replacement - Due date: Needs to be done on Wednesday, 9 March 2022

I have a fence that is leaning, will require a new post to fix it? Also would like trellis supplied and installed down the same side, approx 25 metres worth. See picture for example of trellis

We have metal Frame & wooden pickets - need a post concreted in & gate assembled & installed - Due date: Before Friday, 24th Dec 2021

I need 8 poles installed in my garden. They don’t need to be as thick as fencing posts but need to be secure.?4 is these need to be 2 metres tall and 4 of them need to be 1.8 metres tall.

Garden gate on paling fence with a steel-frame. Looking for supply and install of access lock to 2 gates. Both gates are slightly sticky at their top edges and will need to be sanded down to close smoothly.