Find a fence installation professional in Lane Cove

We need someone to install a fence + gate to create an enclosed area. We already have the fencing panels and gate.

Supply and install new fence. Approx 10 m Take away old palings

We need someone who can measure, purchase and install two side gates to our property in Lane Cove. EDITED TO ADD: The side gates will be on the left and right sides, towards the front of the house. One side is 90cm. The other is 150cm and we would prefer the gates to be aluminium, vertical slats in a dark grey colour. - Due date: Flexible

Remove and replace guide rail on aluminum sliding gate. Must supply aluminum rail which is a right angle bracket 4x4centimetres, length 6.030 metres . Must do aluminum welding on site. - Due date: Needs to be done on Friday, 24 November 2023

Quote to repair or replace a brushwood fence. Please quote the material used (E.g. colourbond or cheaper), including supply and install. (Approx. 8-10m. Quote based on 10m price)

I moved into a property without a gate. The street has rallied around and bought one and now we need to get it installed. We require to cut some of the concrete driveway on one side and dig a hole on the other side of the driveway and back-fill with concrete once the 2 posts are in place. - Due date: Flexible

Need a qualified contractor for a survey between two residential properties to confirm boundary line. There is a fence in the back yard and a block wall between the houses but is broken by a 7m gap between them which I want to join with a new fence creating a continuous divide. - Due date: Flexible

Fence needs to be repaired or replaced. - Due date: Flexible

Boundary Fence Replacement Quote Location Lane Cove Area WORK DESCRIPTION Demolish existing 1.8 metre hardwood fence, 16.6 metres length • leave posts on site • carry rails and palings and stack at bottom of concrete driveway Supply and install 16.6 metres length of 1.8m treated pine standard close paling fence docked top corners (match existing) with 3 rails and 150 by 50 posts concreted in excavated holes. OPTION Please price Galvanised Metal posts instead of timber ACCESS The access property is 75 metres deep gently sloping downhill. A concrete drive runs for 27 metres There is a gate 1.15 metres open width between house and garage giving access to the rear yard. Behind the gate there are concrete pavers and 3 steps for 12 m then a grass lawn. The gate and paving will limit /prevent machine access. From the gate to the rear fence is approximately 50 metres. There is a level difference between the two properties of around 400 to 600mm, a timber sleeper landscaping wall 400 mm high has been installed qpprox 70mm back from the boundary line on the high side property and there is a second timber landscaping wall approximately 1m away on the other lower property creating a garden bed. Fence replacement is not to damage the landscaping walls. - Due date: Flexible

We require a new gate to be installed at our home. Key is to ensure nothing can fit under or over the gate (new dog on the way). Cost below excludes the cost of gate purchase.

Install higher aluminum fence at climble area left corner and right corner to get pool compliance certificate

Wooden fence approx 1.8m high & 3m long. Probably only one post needed as, as photo shows, there is a post on one side & large rock on the other side where post may be needed.

Looking for carpenter with tools to help for 1 hr to set up and secure a frame to 3 posts and a tree. Posts are in (concreted) and we have the timber, long screws and recommended bolts but need some help making sure it is properly secured and put up

Looking to remove a paling fence and replace with approx 1m high picket fence

I have replaced aluminum fences by glass fences but you can see from photo that I have small area closer to boundary fence on garden bed. No concrete supporting so glass fence was not installed. If you have installed aluminum fence before for swimming pool compliance , I will need your help. 1. Add concrete on garden bed to support the fence poles. See photo of my other fence support 2. Use my existing fence material but you need cutting tools in case you need to shorten the fence . 3. Make a L sharp aluminum fence to join the glass fence so kids can not get to the pool. 2.4 meter plus 1.2 meter to form the L shape. 4. Fence high 1.2 meter from highest point of the garden bed. 5. Gap between boundary wood fence and swimming pool glass fence to be less than 100mm. Preferably, if you have experience of swimming pool fence compliance to bit the job. Please demonstrate you have done this job before . The house is at lane cove. Give me pricing of Labour and material . Confirm how many days of this job. Confirm you have suitable tools and screws etc. Confirm my old aluminum fence is compliance with this year’s swimming pool regulation or not. If not, I need to buy some boundary fence treated pipe wood timber . Assuming concrete need dry up time som need to come back after the concrete.

supply and install a black metal gate between the house and the external patio fence. 800mm high x 1m wide.