Find a fence installation professional in Marrickville

Fence has fallen over onto a public Park, needs to re-install and removed from the park as soon as possible

6m long x 1.75 m high wooden fence with a single gate

Replace pool gate lock in back garden

Repair front wooden picket fence and gates.

Remove ad place new timber

Scope as below: -Supply and install new Colorbond fencing on side(10m)and the back(3m) -Supply and install a new Colorbond sliding gate(non-automated) (3m) -Demo,remove and dump existing timber fence at the back(only) Colorbond fence and gate must be standard sheet, 2.1m high, Shale Grey color Posts will be grouted at side and bolted to kerb at thr back Tree stump will be removed before this work starts - Due date: Before Sunday, 21 January 2024

Our colourbond lattice fence needs a gate installed. A post will need to be drilled into the tile of the patio. Please advise if a gate needs to be purchased of if one can be made from the existing fencing. - Due date: Flexible

We have purchased a new side gate, and need it installed. Posts are existing in the spot, but need to be removed and replaced (to the appropriate width to make the new gate fit) as they’re rotting. Must supply, posts, hinges, latch, and all tools needed to get the job done. I will stain and oil gate and posts. Gate hole (from wall to fence) is 1180cm width. New gate is 90cm width. Old gate was 1m width fyi. - Due date: Flexible

Existing fence, cut in x2 to form x2 gates nom.1200mm wide x 900mm high. Add hinges and centre locking mechanism and reinstall. - Due date: Flexible

We need a wooden slat fence installed to sit in front of an existing colorbond fence - there is currently a bamboo screen that needs to be removed (it's tied on. Photo 1 is our fence on the other side - this is what we're wanting with a 0.5cm gap in-between the slats. Details are: - Treated slats, but not stained - Dimensions (approx) 10m in length - We need a bit of space in-between planks - approx 0.5cm - There will be two heights of screening: * 1st section 2.1 high from ground (this section will sit in a garden bed - see photos - so you will need to allow for longer timber to anchor to bottom of bed, approx 0.6m) * 2nd section 2.1M high, to sit on a level concrete path Please quote for all materials and installation. Thank you. - Due date: Before Thursday, 29 September 2022

Replace an existing wooden overlayed slat garden fence - approx 44 metres long.

To install a picket fence and gate in the inner west

20m supply and install of lap and cap fence

Replace front corner block fence with tubular steel.

Need continuity of the fence which I already have (check picture) and design, supply and install the gate. 2.55 meter wide and 1.1 meter high Most probably paint t with matching color as well (but not compulsory) as we have painter with us as well. Please indicate what service your quote includes.

I have a timber fence in the backyard to be replaced. The fence is a dividing side fence with my neighbour and the details are - New fence material is to be treated pine with steel posts Fence to be 1.8m high and 24.5m long Old fence to be demolished and removed Boundary line to be cleared of vegetation (survey work has been done and marked out). Looking for quotes and am happy to meet onsite.

we need a 3 meter monument gate supplied and installed.

There is an old worn down fence between my house and my neighbours. I would like it replaced with timber or colorbond.