Find a fence installation professional in Morningside

I need to install around 30-40m of PVC fencing (mix of 1800, 1500 and 1200mm) sitting directly behind and against a timber (pine) retaining wall varying in height along the property boundary. I have uploaded the purchase order for the fence pieces, which was prepared by a Queensland Fencing Specialists installer. The fence will be installed on the grass/ground (not the retaining wall), but just behind it. There are two small 1m gates that will need to be installed against the building instead at the front pillars. The photos will give you an idea.

I need to install around 40m of PVC fencing (mix of 1800, 1500 and 1200mm + 4 1200mm gates) on a timber (pine) retaining wall. I will purchase the fence but may need assistance in verifying I have all the required parts. I will add images later on to show the retaining wall.

Just have a single fence panel measuring approx. 182cm x 10cm that needs replacing due to being damaged - Due date: Needs to be done on Saturday, 13 January 2024

This will required 5 additioal fence poles to hold the panels. These can be installed on the other side of the fence as we are doing this with the neigbours. Red area in attached photo is where we want the screens to be installed. All materials will be paid for seperately. The quote is only for the task. - Due date: Before Friday, 20 October 2023

We need an L shaped timber retaining wall built along the back and right hand side of fence. Approximately 9 meters along back fence and 8 meters down right fence. Approximately 1 meter deep and 0.5 meter high. Quote is for labour. We can purchase materials separately. - Due date: Flexible

We have dogs and an enclosure needs to be erected for them. We require someone to quote on doing the job. You will need to purchase, supply and install the materials to complete the job. - Due date: Flexible

Need a small fence built. Simple white picket 4m long. We have all the wood just need screws and fittings. Should only take 2 hours - Due date: Flexible

The colorbond post has been hit by a car and is bent, which stops the automatic gate from closing as the post and gate are not aligned. This need to be either fixed or possibly replaced - Due date: Flexible

Seeking a quote to repair/replace my front timber gate and some fencing at the back of my property. GATE Retaining the current timber style to match the front fence, preferably durable steel tubing or white powder coat frame, can pick up on existing hinge holes or make new ones whichever is stronger, supply and installation of new "Gatemaster Superlatch Digital Lock SLDS for timber” or similar (happy to discuss & take advice). FENCE Will require on-site visit for discussion and advice on timber fencing around pool area. Approximately 20 metres in length down the sides and 10 metres across the back of the yard

We are in need of a new timber gate at the front of our house. The existing gate is the wrong shape and height. The new gate should match the height and timber pailings of the fence and should be able to be padlocked. We are happy to paint once installed. The fence height is 1.5m and the opening approx. 2.55m Happy to resuse the existing metal gates if more economical - Due date: Flexible

Hi, I need a quote to repair front fence. Two front gate posts need to be reset/ replaced in concrete to support existing gate. Thanks.

I have a space about 2/3 metres wide that I need to dogproof, in my yard. I'm ideally looking for a gate to be built so the mower man still has access to the yard. I'm hoping we can discuss a potential plan (that you might have) you could go to bunnings and retrieve the materials and then built the gate.

Build a gate to block off part of the yard. 107cm wide. X 120cm high. Photo of the space, baby gate hasn’t been secure enough. - Due date: Flexible

Pine fence install to seal off yard from street and block visibility. Supply of materials required. Two sections, one 2.7m and the other 3.3m. Height, approx 1.5m - Due date: Before Saturday, 3 September 2022

Need a boundary fence built about 21m. Pool will be going in a backyard so needs to be 1.8m high and splash proof (eg maximum panel spacing of I think 10mm) for around 10 metres of it. The rest can step down to 1.2m. - Due date: Before Sunday, 11 September 2022

I need a small side gate to be built between side of house and fence. Currently it’s a small fence - timber cladding removed. This gate needs to be able to be padlocked from the inside.

Hey guys. I need help to install flameless glass pool fence. I have got all materials all ready to go including measures etc. Really looking for hand as its really heavy and someone who done this before, so we can quickly finish it. Its aground 10m long

replace a section of dilapidated chain mesh and timber posts with new fencing- suburban back yard. - Due date: Flexible

Please see the pictures. We have a single fence post and backer rail that a rotten and need replacement by an experienced person. I'm working on the assumption that the rotten post and backer rail can be replaced. We would need the top of the replacement fence post to match the other existing posts. Backer rail is 70mm x 35mm x ~2.4m Post is 120mm x 120mm x ~1.5m from ground level. Flexible on dates but keen to get this done soon. Thanks

Looking to install these in my backyard fence. I am looking to get 3 of these -2400mm x 500mm x 750mm Link: https://www.bunnings.com.au/lattice-makers-woven-fence-extension-2400mm-x-500mm-x-750mm_p3062207 I would like to also have these painted in monument colour. I will provide the paint and fence extensions (from bunnings), hence a quote for labour would be appreciated.