Find a fence installation professional in North Adelaide

Need to put up a fence and gate around the stairs shown. Have bought all the materials: X2 flat top fence panel 2400mm x 1200mm X1 pool gate 975mm x 1200mm X4 pool garden post in-ground 1800mm Panel brackets and angle brackets X1 Pool gate latch Need concrete for in-ground posts: Posts need to be 50cm deep. Shape of fences and gate shown in picture. Need this done ASAP.

2 piece of timber 35x140x500 need to be added 2 X 20x35x700 need added Quad 1500 Eave jointer 600mm Paint timber paperbark Please supply material and I will reimburse it

I need a side gate - either colorbond or wooden to be installed on the side of the house - to be attached to the fence.

Install the gate in drive way. Including gate and installation as well

Need to install the new sheet fence on top of the existing fence to cover the old fence. I can supply all materials. Dernoncourt 5075

Wanting a driveway gate supplied and installed as soon as possible. ***I am looking for the cheapest available price for this to be done.*** Please accept $5 offer so you can view the site and what needs to be done and we can adjust the costs after options have been discussed. ***Not looking to spend thousands so if you already have materials and make custom gates yourself and can make this affordable, please let me know*** (Driveway width roughly about 3.8m) (Wanting a small side gate next to it, and 1 fence panel, possibly 2, to fill a gap.)

Install Colour Bond fence. Have materials, need equipment. I will dismantle old fence in preparation for your installation. Three panels between 4 concrete pillars. https://youtu.be/c1raTXi1Nno?si=OEEDnLPvrEv-f_x7

I need colorbond boundry fence installed and the length of fences is 25m

Install one plastic lattice panel over fence using two steel posts and brackets to dynabolt into the concrete. Install from the black gate going back, similar to the ones pictured in the photos. You will not be able to access neighbours property, but you could use the top railing through the fence to drill screws in to hold the posts. And the bracket will hold the bottom, then small metal screws to secure the panel onto the posts. You must be able to do the job without Mme there, you might want to have a look before doing the job. All materials provided. Work quietly when doing the job as it's my mum's house who is elderly. Do not be bothered by unfriendly neighbours, just focus on the job. Job is in Pennington area.

Qoutation required to install good neighbourhood colorbond fence around 65 SQMT,Height 1.8 meter with plinth.

I need to install 3 panels of fence which is 7/8 meters. I want 1 plinths for each bottom as well. The color bond fence need to be good neighbourhoods and around 1.8 m without plinths. The surface is slightly uneven, not much. Off white color but it has a specific color name.

I want to install tubular fence panel with swing gate. fence length is around 18m and swing gate 4m.

Need a garden gate installed, material will be provided. Pics of gate and where it needs to be installed.

Aggregate for driveway and front of house footpaths. Two side footpaths, rear and alfresco needed too. New build. Fencing with plinths will be in place.

Want an Electric fence installed in the front yard for a new build. 1.8 M Aluminium slate roller gate and fence 9 M frontage Pedestrian access gate

I have a gate and 2 posts. Need it installed between two walls

Fence and retainers needs to be replaced.

Build a tubular fence including pedestrian gate, corner cutoff involved, 1.8 metre high. Approximately 14 metres long including gate. Black preferred.

Remove and dispose existing fencing and replace with approximately 65 mtr or about 27 panels x 2.4m of good neighbor fencing . Block is relatively flat and easy access. Flexible time frame.

I need someone to install the retaining wall posts for me. 3 concrete slippers high, 3 retaining wall posts. Please quote for each post. I can provide the materials as well.