Find a fence installation professional in North Brisbane

We are looking for a skilled Timber fence installer. What We Expect: 🔹 Reliability and professionalism 🔹 High-quality workmanship Scope of Work: ✔️ Remove and dispose of existing fences ✔️ Install timber fences according to project specifications ✔️ Excavate post holes (600mm depth) and secure posts with quick-set concrete ✔️ Attach horizontal rails and vertical palings for structural stability and alignment ✔️ Ensure a straight, level, and secure installation ✔️ Perform a final inspection and site clean-up Job Requirements: ✅ Proven experience installing timber fences ✅ Own tools and transport ✅ Attention to detail ✅ Ability to work efficiently

I need 2 x 2.4m fence panels installed and help to measure up to order the necessary parts. The fence sits above a sleeper wall and there are brackets connected to the “C” bars ready to connect posts. It might be a bit fiddly as one end has a block wall to connect to. I’m unsure what size steel posts to install (e.g 100x100, 65x50) and how wide the actual fence panel will need to be. The panels will be made to order so I need accurate sizing to fit between the posts. If measured and ordered correctly, install should be simple (for someone who knows what he’s doing).

11m linear pool fence needs installation supply would be great too

We have some rotten posts that need removing, replacing and fence panels attached back onto them

Bolt a timber ence rail in one spot back onto the post. Also replace several palings where gaps now appear in fence.

Pick up 9 mesh panel fences (2.1m H x 2.1m W), 10 fence bases, and 10 clamps from Carseldine, and install them along the front boundary of a block in Zillmere on 3 April 2025. Pickup location (Carseldine) has a large gate for easy access. Delivery & installation site (Zillmere) is an open lot with flat access. Pick up point to delivery site is around 9mins drive. Straightforward job with good site accessibility.

I need 3 existing fence posts removed and replaced with new ones. Need the existing ones taken to the tip (will supply tip vouchers). Will need to work around a raised garden bed and neighbour is happy to use his side to access as well. Will need you to supply all tools and materials. Timber needs to be H4 treated posts.

We are needing to put this pool fence around a dog wash. The size will be approximately 3000mm x 2000mm. It has a gate included in this size. The panels are 2400mm, so would need to be cut down. It is a standard pool fence from Bunnings https://www.bunnings.com.au/protectoral-2400-x-1200mm-black-aluminium-flat-top-pool-fence-panel_p0441378. It would be drilled into the concrete. The fence and all of the parts are at the location.

I want to establish a hardstand area on my property to store my caravan. This involves relocating existing fencing to provide access and establishing the hard stand area probably a base of compacted crusher dust or similar. the fence to be relocated is 9m long and the hardstand area is 18m long and 3.3m wide. Some low retaining may be required eg 1 X treated log high

Need current carport gate replaced with automatic one. The manual gate can be removed or repurposed. Gate width approx. 3.5m. Please quote full job cost (labour + materials). Paint can be done by you or myself. Budget is estimate: Quote your number please.

Unfortunately the cyclone has uncovered some dodgy work from a fence/gate install I had done recently. The business that did it has disconnected their phone. I would like to have my mailbox installed correctly and my fence put back together.

Need a chicken fence/run built.

Hello all, Just enquiring for a quote to replace our timber fencing. We are part of a body corporate and will be sharing the cost with each neighbour so will require 2 separate quotes. Also being part of a body corp the new fence would need to be like for like. Thanks again, have a great one

Build a 1800high timber paling fence for 30m length on one side of access road

Wanting to redesign how we use our pool area. The task is remove the old fence and Spigots which are core drilled into the slab, replace tiles. Supply and install a glass panel and pool gate.

Replace a 6ft timber fence, preferably to go to 7 or 8ft. Approx 20 to 25 metres long. Looking for quotes.

Require a licenced person to remove approximately 50 linear metres of asbestos fencing and replace with 2.4m colourbond fencing. Side access available for a small excavator. 6 x3m shed in corner of property, other than that there is clear access along the fence line. Prefer to deal with one company for removal and replacement. Happy for part of the job to be sub-contracted out. Can provide more information and photos as required.

Wanting to get a quote for removing an existing fence and replacing with colourbond. The block is sloping towards to back of the block about 37m

Need a fence quote - to replace the existing 35m fence along the retaining wall with a Colorbond and add approximately 5m of Colorbond with a new retaining wall,

Remove old letterbox and install new one into timber fence. Fence will need to be cut. Need done in the morning if possible.