Find a fence installation professional in Nundah

I need a galvanised steel square tubed fence frame 3600x1750mm. Steel square should be 25 x 35-40mm. This will be used to attach palings for a replacement sliding front gate. Diagram attached.

Looking for a quote to build a 30 metre long fence. The quote should include: - Removal of existing fence - Materials - Labour Additional details: - Fence is on a slight incline - Would like a 1.8M high pine timber fence - Would like it to be rectangular picket style - Treated wood, no painting required.

Require a section of timber fence approx. 3m wide consisting of 1 x paling panel & 1 x gate re-installed with a new post following pool excavation. Cost to include supply of new timber post, all other materials can be re-used.

Re-install a section of fencing following backyard excavation work. Approx 3m wide consisting of 1 x paling section & 1 x gate. Will require 1 new timber post (please include supply of this) however everything else can be re-used.

Small peppertown ninja playground construction and install. Ninja 8j Full instructions available 4 holes dug and concreted in 600mm. Need 2 bags per post. Concrete will be supplied

Tidying up neighbours property after boundary fencing. Approx 35m x 3m. Easy access, relatively flat. Budget job

We need a replacement of our rear boundary fence in preparation for install of concrete pool. Needs to be 2m high by 10.5m wide and to a standard that is compliant for certification Would like some quotes to put forward to the neighbours. Planter box in pics will be removed before commencement. - Due date: Flexible

We have an existing 3m lapped and capped fence (structurally sound) separating the rear yard of our Nundah Duplex. We are needing to move the fence (approx 3m) and install a gate. - Due date: Flexible

I would like someone to build the chicken coop in the picture I have attached. I don’t have the materials so would need those supplied Approx 4 metres long X 2.5 or 3 metres wide.

Quote for 25m long and 1.8m high timber fence with cap. - Due date: Flexible

2 x 2100 x 100mm fence posts need replacing. One was rotten at ground level and snapped, the other is still intact but leaning. The old concrete will need to come out and be replaced. 2 x 1400mm x 1600mm gates (Slats mounted on 25mm box galv steel) to be re-hung once post are set.

Looking for a guy who can supply and built aluminium slat gate. Photo attached with details. Also sample aluminium slat gates photos attached Wall to wall distance is 2.10m. I need a single gate at least 1.5m wide.

I need a fence with a gate to go from the garage at the end of the drive to the side of house (approx 7m) with a gate to keep the dog in the backyard. Will be temporary so need inexpensive materials e.g. pine timber. Note - dog (toy poodle) won’t be there during building.