Find a fence installation professional in Outer East Melbourne

My fences cannot stand straight like before because the bottom of the posts are decayed as shown in the photos. As a result, I would like to find options to repair/replace the posts if possible so that the fences can stand straight up again for the next 20 years or more. Also, there are around 5 fence panels that need to be repaired/replaced and may consider changing rails if necessary. Thanks!

25 metre long 1.5m high Paling fence with pedestrian gate installed.

Car was written off as repairable write off. Airbags did not go off. Car is sentimental need to fix snapped cross member and railing alignment so it’s ready for VIV Let me know of any good panalbeaters and Can Talk price

Need a fence constructed approx. 20 metres. Some demolition of existing fence maybe 10 metres. Around October this year when tenants move out.

Looking for someone to remove existing gate and build/install a side gate either aluminium slated or made out of treated or hardwood timber. Slated in Monument colour. Size is approximately 1240mm wide and 1800mm high. Posts (bolting to a wall) should be 75mm thick. Should be self closing. It will also need a latch with key. Pic is attached of the look that i want and second pic is of the old gate that needs to removed.

Need three paling fences installed and one paling replaced on old fence (literally just one paling First one is 2400 no gate required Second is 2400 with a standard gate Third is 4200 with a standard gate Job will be ready next Wednesday Quote is for you to provide all material as well

80mts Temporay Fencing to be Installed

Gate and side rail installation

Straight 38m fence to be removed and replaced. Ask is to remove, supply and install the fence including all material needed. Height to be same as current. I think 1.8M. 7 longer posts expected as a part of the supply and install. Please see pics of current fence.

Partial replacement of Boundary Fence (This post was previously posted by my wife. My name is David). Approx 16.8 m of paling fence requires replacement. Post holes need to be a minimum of 700mm deep with a full wet pour of 3:2:1 concrete (with no soil mixed in). 150 mm plinth along bottom of fence. Old fence will be dismantled abouve ground, however, you will need to remove material (including excavated soil/ clay)

Partial Replacement of wooden boundary fence, 17 metres long . 2.7 mtr spacing between posts. Fence height 2 Metres. Post must be 125mm x 75mm Post holes 700mm depth Wet pour concrete into post holes ( soil not to be mixed in with concrete)

Supply and install plastic lattice fence extension about 9.6 meters. 4 x Matrix 2400x600 Rainforest Ensure it is installed properly and secured.

The some of the fence timber is rotten and the paling is come off. Would like to see how much does it cost to fix it /replace it ?

Looking for Colorboard fencing quotes (including all materials)- Colorbond Fencing 2.3 m Height 28.5 meters Length Slipper under bottom Removal of old Timber fence - attached photos. Location - Croydon 3136

Replace a small section (3m) of boundary fencing as indicated on image

I need a fence builder to install a fence extension for a newly installed timber pailing fence to comply with council requirements. Council requires Fence to be extended utilising 70x45 treated pine uprights, which must commence from ground level and be attached to 3 fence cross rails and placed at every 1200 – treated pine decking may then be used to extend. The length is around 15 metres, the extension height varies from 200mm to 50mm due to slope of land, but it’s probably best to be consistent at 200mm. Photo attached. Quote on labour only

Front metal gate installation

Dig approx 800mm deep & concrete in place 3 retaining wall posts continuing from current wall. & remove the tree root that is in the way.

2 posts need to be replaced, I can supply the posts

Broken fence due to wind loads, requires patching up or replacing and repainting.