Find a fence installation professional in Tingalpa

Current 20m boundary wooden fence to be removed and replaced. New fence to be approx. 2m high with gravel board.

Install a hardwood post and glass panel pool fence - 8 posts to be sunk and concreted plus install glass panels and gate. All materials supplied.

To replace 4 timber posts (200×75mm) on the retaining wall.

Looking to have a pailing fence built at front of residence. Existing fence to be removed (pool fence panels and wooden posts - photos attached). New fence to be 15m long and with 1.2m high pailings. Rail across the top (photos of style attached). Mailbox to be built into fence. (Owner supplied, photos attached. Materials + labor required. - Due date: Flexible

Replace side gate. Replace pool gate. - Due date: Flexible

Timber fence 170cm high and 7m approx long needs removal and replacing, falling over. It is between the courtyards of two townhouses . Access is only through the units. - Due date: Flexible

Glass pool fence installed, approx 14m. Supply and Install - Due date: Flexible

I need some help removing timber gate and replacing with a steel gate. I don’t have materials and hoping to find someone who can do the lot please. Photos attached. Sorry I don’t have a measuring tape so unsure of dimensions.

Need to install 2 pedestrian gates , materials will be provided. Measurements: 1. 1 m width gate 2. 0.8 m width gate

I would like a gate installed. I already have the gates and fittings. It requires drilling into the concrete post on the side of my house for one of the gates to screw into and one fence post to be dug and installed on the other side.

Wanting quotes on installing a small side gate/fence build. Photos attached and dimensions below. Wanting to build a fence covering the hot water system with an open gate on the right of it. I have the gate ready to go available to install (dimensions of it below) Gate 1m wide and 1.2m high. (Photo attached) 2200mm between house and fence 1500mm between hot water and fence So basically I just need about a 700mm in length fence from the wall that covers the hot water system. Then a post to attach the gate too. Then another post to attach it on the other side. Then another piece of fence about 500mm in length. Those aren’t spot on measurements but are pretty close, as i dont know the width of the posts you will use. Hope that makes sense haha Can be completed on any date within next two weeks

I would like a 5m length of fencing inclusive of a gate installed. Preferably 6 foot tall. Any material. The area to be fenced is a straight line and on level ground. From my house to the dividing fence with neighbours

Looking for supply/install of 12.5M shiplap Treated Pine Paling Fence with Exposed Posts and Capping. Must have; - A single level of treated pine sleeper at the base to run across the length of the fence - treated hardwood posts - 3 rails - Double nail for each paling per rail - Clear finish/sealer

Seeking quotes. Retaining wall erectors required. It’s approximately 20 metres long. It is 70cm high. It is probably a perfect job for a two or three person crew. I would think the post holes could be readily dug with a hand auger. We were thinking the steel stanchion concrete sleeper retaining wall but are open to ideas. Happy to source materials for install Or have someone who can buy at trade price and also do install. Needs to be done relatively soon. It not urgent.

Fencing needs to be installed around and above ground pool. All the necessary approvals so it passed compliance. I have the all the fencing and gates.