Find a fence installation professional in West Pennant Hills

Replace existing aluminium fence and install taller fence (to prevent dog from escaping) Approx width 105cm x 160cm height

Fencing installer needed to help me installing slat fencing (40m) $300 per day

Wooden post at corner of balcony on metal post holder has rotted. Needs replacement. Would like to opt for a steel post as replacement if possible. - Due date: Before Wednesday, 31 January 2024

I would like my fence to be replaced: 1. The current fence is 1.5 meter and I would like the new one to be 2 meters. 2. The length of fence is 17 meters. 3. Material : Pine - Due date: Flexible

Need ~24m of temporary fence with covers infront of a vacant land. Need you to supply and install.

West Pennant Hills. Replace timber side-boundary fence, approx. 20m, currently 1.6m high, would like higher if possible; Install treated pine garden bed (16m x 200mm high) along new section of fence; Install low retaining wall (treated pine ok, 8m x 400mm high);

Replace 1.8 high lap and cap fence. Two sections 6 and 13 m. Good level access - Due date: Flexible

Creating a fence in the backyard. For my dog - Due date: Flexible

Replace 26lm pool fencing

Colour Bond Fencing 2.1 Meter Height x 10 Meter length two sides of Pergola - Due date: Flexible

Approx 7.6 m of colourbond fencing was demolished and needs to be replaced. The fence is on a slope and along a driveway. The height of the fence starts at 1.92m and comes down to approx 1.1m ending at a brick pillar. Price should include removal of demolished fence and putting up new fence. Colour of fence is Primrose. - Due date: Flexible

We would like to instal aluminium fence including gate, around 5-6 m long. Pls quote Cheers Jason - Due date: Before Saturday, 6 August 2022

We need a 1.8m fence supplied and installed for 16.3m. It does not matter what material (timber, plywood, aluminium, Colourbond etc) as we will clad it later. It is within a pool area, so it must comply with NSW regulations by having no gaps larger than 100mm, nor the bottom rail to be more than 100mm from ground (non-climbable zone regulations are irrelevant for a fence 1.8m high). Total is 16.3m, comprised of a horizontally level 5.3m and and a sloping 11m (with a 2.3m fall). Between the pool wall and hedge is right rather tight, with only about 30cm or working space. The hedge must remain (although can be trimmed back). - Due date: Flexible

Need side gate installation. Supply and install or I can buy myself. Width is about 900 mm. Any gate colourbond or timber. See attached pics. Location West Pennant hills

The existing wooden boundary fence needs replacing. Supply & install lapped treated pine fence. 24 metres all up. 16 metres @ 1.8m height. 8 metres @ 2.1 metres height. Wood or steel posts up to you. The pool pump shed as shown in the image I will remove. Easy access plenty of space to do the job. - Due date: Flexible

Fence installation (new). Retaining wall may be required

Hi Guys, Looking for someone experienced to complete the following job this Saturday at a property in Canoelands NSW 2157 Need fencing and livestock shelter built to keep 4 Shetland ponies as current area they are in is no longer big enough for them. Supply and install the following. Star picket fencing with 4 lines of plain wire and one line of electric tape. Plus solar energiser and installation of 4.2m farm gate to enter this paddock. The area will be 14 meters by 30 meters. Only 3 sides will need to be done as one of the 14 meters will be the existing back fence. See attached picture. Livestock shelter preferably with wooden roof to be built along existing back fence to property. Need the roof to be around 6 by 6 meters. Roofing only and doesn't need side walls. All materials and labour and installation to be included in the job. Only those experienced building similar enclosure and roofing please apply. Thank you so much.

Need new fence Approx 15meter Demolition previous old wood fence+bricks wall Retained wall New wood fence installation

We need a gate to be installed next to our pool. It doesn't need to be to any specifications as we already have one gate that meets pool standards. We just want to block off a section of path near our pool from our dog. We also need to improve the structure around our pool pump (for the same reason! We don't want the dog getting into it). We have put up some temporary screening and already have a wooden frame (as pictured) but would like a more solid long term (and more aesthetically pleasing!) structure. It may be possible to use the existing frame. Ideally you would source the materials for us after having a look at the areas, and we would pay for these, and obviously for labour.

Wooden fence was taken down for side access and needs to be reinstalled. Materials can be reused but posts will need to be reinstalled.