Find a fence repair professional in Kew VIC

One glass fence falls off. Need to be done for pool compliance certificate

Looking for a budget repair Nonstructural / decorative Replace whole top timber panel (should be easy to knock out) and replace rotted sections on left side panel -Top timber panel to be fully replaced - left side timber panel - decorative outer timber beading to be replaced and small area at the very bottom of that panel with gap to have timber added Price to include supply of materials (appropriate treated timber for the job). Price to exclude: - disposal of rotten/removed timber (can be left for me to dispose of) - paint and labour for painting - I’ll paint it - but it just needs to be smoothed out if areas are patched/replaced only on the sides so when painted it looks smooth. In photos: - purple highlighting indicates timber frame - orange highlighting/lines indicate areas likely needing replacing For carpenter or handy person Potential for other future jobs if happy with work

Fixing a leaning wooden fence up to 8m length or replace it needed. It appears woods in good condition.

We require 2x timber gates to be built and then fitted to the two side returns. There is an existing gate at the front of the property, and would like the gates built to match (timber, merbau). Painting is not required. Also, the gates need to be fitted with latches. Hardware (timber, posts, hinges, latches, etc.) to be provided by the builder. Posts are in a monument powder coated metal, would like made to match. Per the photos there are existing gates which are to be removed. On the right side return there are existing posts which can remain in situ, so the gate can be installed onto these posts. On the left side return, 2x new metal posts will need to be supplied and installed. Further, due to the size of the gap, a small fence will need to be constructed, which the post/gate will connect to (you can see a temp installation in place today in the photos). Inspection welcome. Any questions, please post, thanks, Justin

Part of the fence blown down by strong wind. Paling still intact. Fence post broken. Mainly to repair fence post at the minimal to allow it stand up. The fence that has come down is about 5meters long.

We need the self closing pool gates (x2) fixed. Does not require new hinges, just adjustment of current ones.

existing iron gate needs to be attached by bolts after being snapped/pulled off bolts still in holes

Need to fix the fence with two post to set it up with concrete and repair the door can be open and close with level.

Need to repair side fences for front yard and back yard - Due date: Flexible

Back yard fence is leaning on a slight angle. Would like it straightened upright. Think new post may be required. Fence itself is still in good condition. - Due date: Flexible

Repair a backyard fence gate - Due date: Flexible

fence at the back need to be straightened and reinforced - Due date: Before 2023年10月13日 星期五

Boundary Fence Repair where required and trellis work. - Due date: Flexible

Pool gate is currently not self closing. The gate hinge is stiff, and gate can be pushed past the latch. - Due date: Flexible

Traditional wooden gate probably needs new latch . Top of post also needs repairing - attachment has fallen off. - Due date: Flexible

My pool gate needs some adjustment or repair to be compliant. The gate currently does not close automatically from a particular position. It requires either some adjustment to the hinges or realignment of the fence post that the gate is attached to. See photos. - Due date: Before Friday, 4 August 2023

The pillar fence in our front yard was hit by a car and one section of the fence has completely collapsed and needs to be repaired. - Due date: Flexible

A few palings have become loose/detached due to rusting nails. The wood has split on one small paling above letterbox, may need repairing. - Due date: Flexible

A few palings have become loose/detached due to rusting nails. The wood has split on one small paling above letterbox, may need repairing. - Due date: Flexible

Gate is about 4m across and has come off hinges on both sides. It's a metal structure with timber fencing. Gate is entrance to yard. Hinges need replacing but are weleded onto metal frame Do not have any fixings so these need to be provided with task. Gate must be sturdy once finished