Find experienced local fencing contractors in Airport West

Gate post has seperated with ground subsidence from fence. Needs repair, replacement of metal fence.

Guard required under fencing to stop adjacent car park rubbish flying in onto property. Fence measures approximately 6.4 meters.

Install a new colour bond fence and remove the original wooden fence

Needing Aprox 31 meters of colorbond fence constructed Monument colour Airport west location Pull down old timber fence also - Due date: Flexible

Looking for someone to help build a front fence and gate at property in airport west. Gate - 1m High X 3.1m opening. Ideally a slider, but would consider swing opening. Fence- 1m high x 12.1m. As we are a corner block need to be 1m but the section away from the corner we’d like it to be 1.5m. Side fence on Corner(see photos) - one post is loose and needs fixing. Standard picket fence Half Round Picket Paling and square Capital Tops for posts. No painting required. Happy to supply materials or for these to be included in quote. Ideally completed by end of January. - Due date: Before Friday, 26 January 2024

We need 3.2m of new fence palings installed, at 1.8m high. Then across an area that is 7.2m, we need new horizontal beams installed into existing concrete fixings, then fence paling to be installed. Materials will also need to be supplied. - Due date: Before Wednesday, 15 November 2023

Create a gate and fence to keep my little dogs away from decking and grass - Due date: Flexible

5.5 metre timber dividing fence to seperate 2 townhouses - Due date: Before Wednesday, 19 July 2023

I would like a quote for a front fence to be rebuilt. Approx 16m. Also a electric gate to be installed over driveway.

Need. New colourbond fence 8.7 long 2.1 high Old fence will be removed by me. - Due date: Flexible

I have an existing picket fence (approx 16m long) that needs a rejuvenation, would like the pickets replaced, the turned tops of the posts cut off and the pedestrian cut out removed. The bones of the fence are fine, the motor was recently serviced and is in good condition so it just needs an update. The stated budget is purley a guess, will need someone to come and take a look. - Due date: Flexible

Gap has formed under colour bond fence. Remove 3 sections of fence, supply and install 3 sleepers and reinstall fence. - Due date: Flexible

Remove 2100 high timber fence Install new boundary fence 2100 high with extended posts and timber cap. Install treated pine lattice 19 meters long

Hi all I need a picket fence installed 9lm in length 1200mm high. All materials will be supplied including concrete for the posts. Labour only costs - Due date: Flexible

I need a basic gate installed on a deck. There is existing fecing around the decking but no gate above the stairs. The gate will neeed to be fixed to the existing fencing. The gate will need to be properly fixed to tye I can purchase a gate and latch from bunnings but would appreciate advice or the peson who installs to recommend the appropriate hinges. - Due date: Before Monday, 15th Nov 2021

Removal and replacement of 30 meter of old paling fence. Easy access.

Install 15mt of glass pool fence. Spigots and glass already on site Continuous one line with two gates - Due date: Needs to be done on Wednesday, 27th Oct 2021

Location of job is airport west.Section of brick fence has been knocked down requires new bricks to be laid and possibly rendered and painted to match. Section is approximately 2 m wide by 1 m high. 🙂

24m of a 40m paling fence is sagging. The palings themselves are in good condition, maybe not so the posts. Easy access to both sides of the fence esp the side with the posts. I need it repaired ASAP, please.

Fencing install (gates supplied). I have 2 picket fence gates that I already have so basically just needing the posts and extra couple of panels created either side of the fence. I have the latches and hinges however I require someone to supply and install 2 galvanised steel posts (into gravel) as well as add in some additional fencing / panels to either side of the gates (1.8 meters high). I also need some steel tubing put in the ground so that the drop bolts for the gates have something to drop into when the gates are opened and closed. Overall cost needs to be inclusive of the materials required. Please see attached pics for gates, driveway and dimensions.