Find experienced local fencing contractors in Auburn VIC

Screws holding the gate to the brick fence have gotten loose

I have a fence near my pool. The pool inspector has said that I need to cover the top two rails of the fence with a 60- degree chamfer OR double pale the fence. Essentially, I need to ensure there are no climbable rails on the boundary fence within the 900mm diameter non-climbable zone. The pictures and "ask" from the council is attached.

I just need the left hand side fencing to be secured by star pickets so that the fence can be propped up and stabilised

glass pool gate Need to replace with higher glass to compliance with council regulation.

Reattach lattice to brick wall that has come loose. Holes are already drilled into the wall, need 3 wooden stakes reattached to wall with screws and ensure it’s secure. Will need to work around a spa and garden bed with trees

Fix broken 1200mm x 1100mm glass panel in pool fence, including reinstalling supporting post. I already have a replacement glass panel from Bunnings (very heavy!)

We are having a crossover & concrete driveway poured & need the red brick fence & footing removed & would like a white picket fence with electric gate installed- similar to next doors charcoal fence. The concrete works are scheduled for 2nd October and we need to have posts cemented in at the same time for the fence. Would like you to come out and quote the fence and the work will need coordinating with the concreter. Price is for site visit and quote

We need a gate panel built to match the other side of our house. Measurements: Width: 1400mm Height: 1850mm The gate can have some pickets either side, the width above is the total size of the area to fill.

Repair three broken and rotton timber

Needs to fix a sagging wooden gate

Need a new timber gate installed between treated pine fence (not in great condition) and house (weatherboard). Around 1960mm wide and 1800mm high. Existing steel paling where old gate used to be. Garden can be cleared as needed. - Due date: Flexible

Remove & Replace an existing fence roughly 8 meters long . - Due date: Before Sunday, 7 January 2024

Need two additional fence posts put in to hold up fence. Fence is slightly bowed. Current post is wobbly. Need: - two holes dug - two fence post cut (one fence height and one smaller picket fence height) - two fence post put in ground and cemented in. (Need to prop / hold up fence with something while concrete drying) I will provide two timber fence posts and quick set concrete bags. Please bring: - tools to cut posts - tools to dig holes - temporary timber or something to prop/hold up fence with while concrete drying. One post to be put in around fence height and the other smaller post put in at picket fence height. Available to complete job tomorrow (Tuesday) or Thursday or Friday. (Needs to be done before Saturday. - Due date: Needs to be done on Tuesday, 10 October 2023

New picket fence installing roughly 9m & 1m wide gate in the middle. Electric gate on the right (for drive) roughly 3.4m Including materials and painted. - Due date: flexible

Council requires a Buiding Permit before new boundary fences are erected. I need a Building Surveyor apparently to do this. - Due date: Flexible

fence panel starts leaning - Due date: Needs to be done on Tuesday, 25 July 2023

Need approximately 5L/m of timber paling fence replaced including 3 posts and rails. Old section of fence to be removed including the creeper that has over grown it. Also need fence extensions added to top of fence to meet pool compliance. These will be supplied by me. Approximately 6 rosemary bushes to be removed. All waste to be taken away and disposed of by you. Will need to inspect site to organise materials and quote. - Due date: Before Saturday, 17 June 2023

Hello, We are seeking quotes to build a new fence that will attach to the existing fence left. There is a cement slab built to our boundary on a neighbouring property. We would like to ideally build on top of this slab. The approximate new fence length required is 18 metres long and standard ~1.9 metre fence height. We are flexible with timing. Fence build would need to include all materials and labour for a standard treated pine fence. No painting necessary. - Due date: Flexible

I’ve got gates that fit across our driveway, but need them installed with posts. Images attached, there’s a few spots the posts could go, I just need the driveway blocked off so the dog stops barking at the front fence :) - Due date: Flexible

To cover an existing side fence in lattice, with the lattice extending above the existing fence to about 1st story height (if possible). Lattice will need to be attached to existing fence and brick wall. It will need to be cut to accomodate a bench seat that abbuts the existing fence. Please quote to come and view the job and discuss requirements, purchase and supply materials and complete the job. Would be great if the job could be completed this week.