Find experienced local fencing contractors in Brisbane

Attached is the image of the site survey Red arrows show the direction fence needs to move Boundary fence on the north side hasn’t been installed to the legal boundary We need this to be installed to the original boundary The boundary has been pegged by a surveyor for accuracy

Just wanting someone to put up 3x bamboo privacy fence screen for privacy, have all the equipment. Just don't have time

Install galvanised steel post chain fence. Approximately 5.5m long and 1.2m high. Existing post to tie into. Concrete pad ready to be bolted into so need for digging holes. Fence to replace car port wall being removed today.

The frameless glass pool fence has a hinged glass gate that now slams shut and needs the self closing hinge adjusted or replaced

Side timber fence between neighbouring property 50m long. Hardwood posts, pine rails x3 rows, pine timber palings 100mm wide and 1.8m high

Needing to replace pailings and rails for front stair case.

Old fence needs replacing. We need the old fence removed and disposed, and new one built. Treated timber, slatted, 40m total length, 6 ft height, in a straight line. Open to colour bond option.

Replace or repair hinges on the steel gate to the bin enclosure. The gate is catching on the frame because the hinges were slightly bent I think. The gate closes but I have to lift and push which is still scratching the frame. The enclosure is outside and you can come anytime to have a look/price

Looking for someone to supply and install a white batten fence on top of the existing brick wall. Will need to go around the piers and be approximately 0.9m height. Total length of wall is 6.2m.

Our timber front gate needs to be replaced. It measures 1440 x 990. See photos for further details. We need someone who can provide all timber, parts and paint (you're welcome to reuse any of the hardware that's in okay condition). Thank you in advance for your interest.

Repair gate so latch can work and fix a few loose posts in railing. See image for gate to be fixed.

* I will post photos of what needs to be done in the morning. I apologise. I posted this at night after it was dark . We have a 1.2 kg Chihuahua that hangs around with her 78 kg Rottweiler brother and unfortunately this rental has holes in the fence that can expose her to the road. I need the holes filled with wood or bricks and I need the gate fixed or replaced on one side.

Post holding sliding gate has been pushed and this has caused the bolts to be uplifted slightly (post is now on slight lean) Need bolts removed, apply concrete glue, then install new dynabolts so post is vertical so gate slides smoothly. You supply dynabolts and concrete glue

Wire trellis installation on back timber fence

We have three panels of fencing in the backyard that I think are abestos. One side has been sealed/painted. It's falling apart and away from the fence posts and I'd like it safely removed. Think it's under the 10sqm limit but would still need to be wrapped in thick plastic, etc. and want done properly. Tried to show in pictures but can take more if required. If you could also take away the rotted wooden posts and the standalone metal sheet, that'd be great too (don't think that one is abestos).

We have glass pool fencing supported by powder coated posts on a wooden deck. Job 1 - a glass panel has shifted away from one of the posts, causing the gate to sag. The glass needs to be removed, panel replumbed to be vertical and glass reinstalled / glued etc. Job 2 - There is also a second gate that’s not closing well. The gate hits the latch. My guess is easier repair than job 1. Job 3 - one other panel is coming away from a post. More minor fix than job 1. Photos in order of jobs above. Need contractor with demonstrated experience in similar repair jobs for pool fences, ideally glass panels.

Hello. We’d like to build a privacy screen across the pool filter as shown in photos. The screen will be made of treated pine (2.1m lengths) and to be at the same height as existing fence. Concreted posts in and palings on rails. Please include time and materials.

Wanting someone to dig out a trench to then pour concrete into it suitable for a pool fence to be built on top of (which I’ll do). Slab would need to be 6.3m long and 20cm wide. Depth would just need to be deep enough to be suitable for a glass pool fence to be installed on(approx 20cm), possibly with some reinforcement in it if needed. Finished concrete would need to be level and the same height as the grass either side and nice and flat on top suitable for tiles to be laid onto it. Ground is relatively flat at the moment.

We have an existing fence down one side of our house but the palings are on the neighbours side. We want new palings on our side. So we need to get railings and new palings installed on our side. The fence will require two different heights due to the small concrete retaining wall down part of the fence line. 1.8m = roughly 8-9metres 2.4m = roughly 7.2metres We can buy everything and have it delivered to the house if you can provide a list.

We need our front fence painted. The fence has 80% of first coat done. I want 2 more coats with enough time between to dry completely (do over a couple of days maybe?) I don't want the stainless latch painted at all but the hinges can be as was done on 1st coat. I expect a good and detailed job, making sure you get into every corner and joint properly, including in and around the metal gate frame. I will provide paint. You to need to provide tools/brush etc. You will need to wipe down and clean all the dirt off the fence first. A sheet or cardboard will need to be used to not spill onto the concrete. There is no grass in yet and just dirt, so use a sheet or something at the bottom to stop dirt being dragged in. I expect you to do under the bottom rail properly and all the way down the rails to ground.