Find experienced local fencing contractors in Caulfield

build fence a nd gate in caulfield , need some body with some experience , dig footings, install slat timber fence and gate.

Part of fence has fallen down. Needs to be lifted and “nailed” back to posts…

Remove the existing fallen fence. Supply and install a new paling fence (similar to existing one). 3.70m length x 1.95m high

I need about 8 linear meters of piling fence supply and install. 2.1-2.2 m height

Paling fence and roller door needs to be removed and replaced with a new fence. Fence backs onto a laneway

I need someone to come and repair my fence, part of the fence is somewhat tilting. There are 3 posts that may need to be replaced as they are bent (picture attached). One part of the horizontal beam is rotten and may need to be replaced (picture attached). Some of the vertical panels are rotten hence it also may need to be replaced, or resecured as they are coming off from the horizontal beams

Need a labourer to assist experienced glass pool fence installer 6th August 8am > 4pm no tools required, some experience is preferred

One panel from our pool fence fell over in high wind. The panel is intact but needs to be reaffixed. At the same time we would like the other panels to be adjusted so that they are all straight. Parking is available onsite.

Fence repair. Eight foot high pailing boundary fence - see photo below. The support posts over a length of 6 mtrs have rotted and no longer have integrity. This results in the fence moving in the wind causing issues. Seeking to secure the fence against movement most likely by the installation of new support posts . Not seeking to replace existing posts or shore up the exists posts - now locations is fine, I own two new 120 mm X 70 mm X 2.7 m posts and one used 120 mm X 70 mm x 2.6 m post that can be used for the task if they are suitable. Don't wish to use quick dry cement. Work must be secure the fence against movement.

Need woven trellis fence extension 600mm high and 12 metres long

The post holding up the gate is rotted at the bottom. The post is attached to a brick wall. The gate itself is a metal frame and wooden slats. It’s also pretty beat up. We would like to replace it. We are open to suggestions as to what it should be. Current gate is 1880 x 751.

Timber boundary fence installed 10.2 M long and 1.8 M high. - Due date: Before Sunday, 24 December 2023

I need to have a free quote to replace existing timber fence to colobond fence with gate, this is 35 meter on a corner block. Thankyou! - Due date: Flexible

Repair or replace the broken areas of fence kickboard. Any day is ok. - Due date: Flexible

2 parts to the job: A- Remove and replace 4 fence palings (I have bought 5, they need to be cut down to size), working around old trunk on floor. B - Cut fence extension lattice (I have bought it) down from 1500mm length to 1120mm length and place on new part of fence. No need to paint - I’ll do that! - Due date: Flexible

8 ft fence leaning as a result of winds

High flat metal pool fence. Side gate. 1.8 - Due date: Needs to be done on Wednesday, 31 May 2023

to remove old gate and Supply and install new gates. Please state what materials will be provided. The price is just a number please ignore it. you can state your offer. Thank you. Thank you. - Due date: Flexible

remove, dispose old fence, replace with new paling fence, 20.3m long, 2.740m high, (9ft) - Due date: Flexible

Wanting a gate built and installed to the side of house (brick) with the latch connected to a wooden fence. Width of area: 1.5 m Height of gate: 1.2 m Picture of area where gate to be installed attached.