Find experienced local fencing contractors in Concord

Instsall 1.8m high and 3m length bamboo fence screen (5 pieces)

Instal screen fence to the fence, total 14 meter

I'm looking for a side gate supplied + installed. Dimensions approx 2.04m width x 1.8m height. Would need to be black to match existing timber fence. See attached photo of side gate location + some sample side gates that could be installed.. In terms of material, flexible to either black aluminium slat gate or timber gate painted black. Please let me know in quote which option you propose. Needs to be able to be locked via padlock.

Remove / dispose of timber back fence and install colorbond fence. There are three properties that share this boundary fence. See attached picture, my property is the highlighted one, but the property owner behind me would like to whole fence replaced for his boundary, and my next door neighbour has agreed.

Looking for someone build and install an aluminium gate to cover my pool filter. Size is 1285 x 1040mm.

I need a screen and three gates done to the following specs: 1. Treated Pine Horizontal Fencing - Length 4m - Height 2m- Spacing 10mm - Galvanised Posts// 2. Three Galvanised Steel Frame Treated Pine Gates; each 1 m wide, height 2m, galvanised posts, hinges, latch

To enable me to certify my pool there's some works required on the gates. Have 3 gates. Please see the report from the certifier refer to the parts about the gates.

Need to extend gramline fence by 300mm with same profile. Back fence is 9.5m and side fence is 13m

Required to remove gate fence and make good the fence. The fence is 1.6m high and the gate is 1.2m wide. There are two heavy duty hinges behind the gate which has to be removed. All required materials provided. If your offer is accepted, you need to visit location and confirm if you can complete the job.

Picket fence repair A few fence panels broken Many need re nailing

outdoor fence wire needs to be fixed and tighten up. appox around 10 meters in length

The fence is blowing and needs to be fixed to the supporting side gate using roofing screws and close the side fence

The fence has fallen over on one side of the front of the house. This part has half of the gate of the driveway as well. I'm not sure whether this can be repaired or a new fence needs to be installed. Looking for advice and quotes. - Due date: Flexible

Fence is timber palings fence. One post at the rear needs to be replaced as well as some adjacent palings. - Due date: Flexible

Front fence, with electric gate required. Current Low brick fence present, needing additional height and addition of electric fence for car entry (which is unsecured no fence/ gate at the moment)

We settled a property recently and need to make the existing aluminum fence compliant. Need help determining the scope of work needed and the actual work.

Need new painted fence post and rehang the front gate . - Due date: Before Saturday, 31 December 2022

Need to install a new thin lock on a existing aluminium side gate.To make it work, need to: 1. Move the existing pole, attached top colorbond fence out by 1cm to close the gap between the pole and the existing gate for new lock to work. maybe add another piece of timber? 2.Drill and cut out the aluminium pole to install the locking mechanism, including the front hole for key opening 3. Drill an cut out the opening for locking latch on the gate side 4. Complete installation of lock by installing the front and back components - Due date: Flexible

replace bottom rail - existing one rotted out, prefer hardwood, palings would need nailing, slightly difficult to insert new rail. - Due date: Flexible

I previously requested this task in Feb but could not proceed as I was waiting for my neighbours' views. My back fence (timber) is 1.35m high from the ground level, we need to increase it to 1.8m. The brackets run across on my side of the fence, so I'm keen for someone insert new timber strips to the bracket running horizontally across the fence at the bottom (an extra at the bottom on the land level if you need to), and increase it to 1.8m from the ground level. Hedges will grow in front of them, so not too worried about the look. Checked with the neighbours, they're now fine with the fact that the new timber fence rising above will not be capped. The width of the back fence is 13.8m. Looking forward to your quotes. Many thanks - Due date: Before Thursday, 30 June 2022