Find experienced local fencing contractors in Cowes

Had some recent storm damage done to a small back fence we’re wanting to repair / replace

Need 2 wooden gate’s & installation 1000 x 1800 & 2000x 1800

Build a timber boundary fence 39 metres X 1.8m

Build and install a side gate between the house and fence. The gate needs to be made out of timber. To be 1.8m tall and 1.8m wide. With a 1.2m opening. - Due date: Before Sunday, 9 April 2023

Length approximately 40 mtr Hight 2 to 2.2 mtr high Treated pine posts Chicken wire to 1.5 and barbed wire for balance - Due date: Before Monday, 20 June 2022

Need gates installed on both sides of house. Timber (or aluminium) horizontal slats. Approx 1.8m height, one side is approx 1.75m wide, to be lockable. Other side is approx 1m wide, to be fixed (instead of gate). Located in Seagrove, Cowes. Attached are the photos of the area and a sample gate that I'm after. Needs to be done ASAP.

I need to get a new pine wood fence put up around my new house in a new estate by mid March/end of March. Fence 1 (side fence) x is 22m, tapering down. Fence 2 (back fence) is 16mm, full height 1.95 metre fence with capping as per estate requirements. Contact me for floor plans. - Due date: Before Tuesday, 15th Mar 2022

I need the bracket welded together again. It broke off in the wind. Also, if you can, screw the latch back onto the fence and also secure the top of the fence back on again. Can be done anytime, hopefully in the next week or two.

Fence needs repair or replacement in some section - Due date: Flexible

Sections of fence need repair or replacement

Build and supply a colour bond fence down at Cowes Phillip island approx 21 metres long

We have had our pool fencing replaced and some of the pavers are broken we need these replaced

Part of my side fence has come down so I need five posts back in. The block next door is vacant so easy access.

Hi, I am looking to have a new boundary fence installed and require the following to be provided; 1. Side Boundary Fence @ 1.95M 2. Cypress Posts 125x75mm x 2.7M concreted in @ 800mm + Eco-Treated 3. Rails & Plinths Batten Screwed w/ 300mm supports in each bay 4. All fixings HD Galvanised 5.All holes graveled w/ post support plates 6. Fence length is 14 metres Please Note: I will organise separately to have the old/current fence removed and disposed of prior and therefore you will not be required to perform this work i.e. your job is to supply the materials as above and construct the fence to completion. Thank you

Hi, We have an existing rear boundary fence that is about to fall down that needs to be demolished and replaced with a new fence. The length of the is 13.5 meters and the height is 1.95m of treated pine pailings. Behind the fence is a vacant piece of land in which you will be able to drive your vehicle onto and park right next to the fence to carry out the work. I am looking for a professional fencer to perform the following; 1. Supply and install treated pine fence (posts and pailing etc) 2. Remove old fence, place neatly on the vacant land