Find experienced local fencing contractors in Croydon VIC

Looking for someone to remove existing gate and build/install a side gate either aluminium slated or made out of treated or hardwood timber. Slated in Monument colour. Size is approximately 1240mm wide and 1800mm high. Posts (bolting to a wall) should be 75mm thick. Should be self closing. It will also need a latch with key. Pic is attached of the look that i want and second pic is of the old gate that needs to removed.

Small tree branch came down on fence into neighbours yard. Need it cut and removed. Also need damage panel of fence replaced

The original fence is old and needs to be replaced with a new one

Looking for Colorboard fencing quotes (including all materials)- Colorbond Fencing 2.3 m Height 28.5 meters Length Slipper under bottom Removal of old Timber fence - attached photos. Location - Croydon 3136

Make a fence at the side of ramp in the same style. It is about 3 m. Need 1.5 m. Hight from ground

Triangle corner, has a gap in the corner as one fence is bending away, need some timber or something to fill the gap. Might only attach it to one side fence so it doesn’t pull the good fence over in time if possible

Removal of old fence, supply and installation of new timber post fence with concrete on posts. 600mm deep post holes! 3 rails timber fence 1.8m fence.. total length is 46m but probably installing 36m based on aggreement All trees will be removed before fence installation

I am looking for someone to remove the existing falling-apart timber paling fence (10m) and install this product: https://www.australianlandscapesupplies.com.au/products/acoustic-fencing-diy-kit-2m-wide-betta There are 12 aluminum posts two of which need to be screwed to the wall and the rest must be embedded in the concrete. There is a gate too which needs to be attached to one of the posts as per the attached plan. Spacing of posts are 2 meter. The street has a little bit of slope which means each post needs to step down 50mm from previous post. Once posts are in place, the rest is easy: Install bottom rail slide the fence panels and stack them on top of each other Install the top rail.

Hi, I'm wanting to build a paling fence to be built. Length approx 17m, height approx 2m I don't have any images yet but interested in pricing at this stage

Supply and erect approx. 21m of 1.8m high colourbond fence, similar in style to that shown in photo (Quote will need to be agreed with neighbour)

remove old fence, install a new fence & add a gate at a proper position, need share cost with 2 neighbours, might include a little cut on a tree's root (up to your professional judgement)

Vertical timber fences are broken or fallen down. Need to repair or replace these. Horizontal fences are rotted and may need new. Attached are photos. Need quotation for compete work of fence repair / replace including material cost.

Supply and install a fixed Spar barrier with child proof gate must comply with AS1926.1-1993 including making the area safe

the fence on the public boundary with neighbours are falling down towards to our side, need to be repair. The total length is around 5-10 meters

Fix Fence without replacing

Chain wire fencing specification: Roll height 0.9m H Roll length 20m L 2.4 m between posts with plinth and top rail Period handrail along top of rail and post Simple wooden capitals on end posts Hexagonal or diamond spacing 50mm (50 'knuckle-knuckle' pitch) All wires 2.5mm thickness Material: Tough Galvanised Steel Wire https://www.ausconbs.com.au/chain-wire-900mm-galvanised-2.5mm-thick-10m-rolls

Need to fix part of the fence around 3-4meters

Need to fix 7 meter timber fence

I need to build a fence for the side yard. Roughly 30m long and 180cm tall and remove old fence

Need existing fencing pulled down and new fence installed - approx 15m in length