Find experienced local fencing contractors in Geelong

Remove old picket fence and a small path gate and replace with new white picket fence and gate. 15 m length in front of the property- easy access.

Install modular plastic green wall panels onto a timber fence Firstly attach timber pailings soaced 25cm along the fence and then staple and screw plastic green wall panels onto the fence so that the panels are firmly attached and secure. Fence photo attached and green wall panels. Panels click together and you cut them as needed to fit the size Dimensions: 9.8m x 1.6 m

We need to install a Manual sliding gate at our driveway on concrete floor 3 Mts wide . All material including gate & assorted support material will be provided . The person should know how to install & must have all the tools .

Build / Install a 55 metre perimeter fence on a residential property in Anglesea. See image - red line is the fence. 100x100 cyress posts with wire mesh fencing. Posts to be concreted in soil. Land on slight slope but not a problem. Fence high 1 metre with one wire strand on top. Build 3 gates each 1 x 1.2 mtr. Use cypress 100x50 for a rectangle frame and with steel mesh inside. MUST BE DONE BY 17TH DEC. I don't know what a fair price for this is but had to enter something.

Replace and paint a picket fence with 2 gates. The fence by the side of the house is approximately 5.5 metres in length.. It has a gate. The fence in front of the house is approximately 15 metres in length. It also has a gate. The pictures show the design and colour scheme of the fence. Additional pictures can be obtained at : https://www.realestate.com.au/property/10-cabernet-ct-waurn-ponds-vic-3216/ If would like to inspect the fence at 10 Cabernet Court Waurn Ponds please do so only from the street as the property has a tenant. Please ensure your quote includes labour as well as materials. Thank you, Diann

- Remove & replace approximately 1250m of fencing to be stock proof. - Repair approximately 700m of fencing to be stock proof. - Disposal of removed fencing.

Need help to install a gate and small part of fencing. Gate is 2.6m x 1.8m (WxH). Fence is 1m x 1.8m. Price include materials.

Timber front gates need repairing and rehanging.

Two sliding gates built and installed. I have most of the hardware for the front gate, including the motor kit and colour bond sheets.

The posts on a fence have snapped. The fence now needs new supports.

Build new timber fence at the back and timber retaining wall on front side

*fence 12.5m in length. *extensions are 1500mm x 500mm (works out 8.33) *I will have 9 brought ready for you *I Need someone who knows what they are doing to making it look nice and symmetrical as well very stable. You must bring own tools for the job Aswell as screws. Looking to have job done next week. Tuesday 27/8 or Thursday 29/8 between 1-5pm *I will help with any labour required

Need the gaps between brick peirs and brick fence caulked, including backing rod. Both sides of fence and tops. Ideally in a similar colour to the bricks. All materials to be included in offer.

I need mouse and snake mesh secured to my fence extenders around my outdoor pool. I also need a fence extender panel installed in a gap in my fence. Photos attached. Task price is only an estimate and does not include material costs. Please email [Content Moderated] with your interest initially, not a phone call.

Someone to remove old fence material from site today, Cut up and ready to go

Need someone to remove this old timber panels and timber waste, earlier the better

To add two sides to the perimeter fence, lattice like fence, with simple gate- I can purchase gate if needed See photo. Measurements are approx 3800 x 2700mm. Open to what the height should be, not a jumper and would be supervised. Do not have my own materials.

A couple of fence sheets ripped off fence during high winds last week. A couple of posts are also a bit wobbly so may need some reinforcement at the base. Need help patching this up without having to redo the entire fence. Tasker may need to purchase the replacement colourbond sheets, this needs to be factored into your offer.

Hi! I need 3 x holes dug for metal fence posts. 3 x 1000mm x 200mm (ish) holes to be dug for galvanised steel fence posts. Unsuitable for heavy machinery due to being located beyond a tiled area I don’t want damaged. Had to include a price in the add - up for discussion, make me an offer!

Dog has put holes in the fence therefore needing 6 palings fixed along the fence line