Find experienced local fencing contractors in Indooroopilly

If the 6 holes(some root hide underground)not deep enough may need your professional tools makes it deep enough. At Indooroopilly. Prefer Monday, Thursday Or Weekend. I have 5* x 2400*65*65mm squar gavinish posts (all with caps and bolts) and 1*x 2000*65*65mm. all reusable wood fence enough for 10m .10 packs *20KG quickset concrete from Bunnings. Price negotiable but limited as I had done most of the labour work.

New wood fence 2.4 high palings , approx 10 metres , All existing will be cleared and levelled & prepared for your work to commence

Small deck has a rotting post to be replaced, this may extend to the surrounding railing and attached lattice work. Also replace some decking boards. Also replace a gate fence post - Due date: Flexible

Urgently require professional Carpenter to replace an existing steel person gate with red cedar timber gate. 1800x1335. Door hardware to be swapped. Timber door is brand new and needs hardware cut in. Also required is approximately 7m of timber battens under new deck. All products supplied and on-site. Equipment required. - Due date: Before Thursday, 3 August 2023

get rid of old fence and install new fence, timber or colorbond are considerded, length is about 43meters. please give a quote. thank you. - Due date: Flexible

Supply and install 75lm of rails & paling onto already installed timber posts. - Due date: Flexible

I am looking for install 24,5 m new fence - Due date: Flexible

The pool fence panel has fallen and smashed. I need a qualified glazier who could replace the shattered glass pool fence panel. Please quote for the replacement glass, install it, and clean any remaining shattered glass. The panel is roughly 1400 x 1150 x 8mm - Due date: Before Thursday, 30 March 2023

Wooden paling fence needs replacing Corral is 4.7m x 1.1m x .1.1m high with .72 opening along front Fence is 7.5m x 5.2m x 1.8m high L shape with gate Some of the posts may be sound. - Due date: Flexible

picket fence section is out of alignment due to tree stump, its tilting. Need to remove the section of fencing, put new posts in and replace the fence. - Due date: Before Thursday, 26 January 2023

We have purchased 4 timber batten panels (90cm wide x 2.7m high) and need to mount them to our decorative colour-bond fence. The reason for these high panels is to create additional privacy (the colourbond fence is too low at 2 meters and has too many holes to offer decent privacy). The panels have a slats running across their back that can be drilled into. You will have to supply tool and necessary hardware to attach the 4 panels to the colourbond fence. - Due date: Before Wednesday, 30 November 2022

We have purchased 4 x 90cm wide (2.7m high) timber panels. We’d like these installed as a new fence behind our decorative colourblind fence in our courtyard (see photo) and the colourblind fence removed from it’s wall attachments. I assume this we will need up to 5 fence post cemented in to support the panels, but am open to suggestions on best execution. - Due date: Before Wednesday, 30 November 2022

My existing Personal gate accidentally damaged and needs repair or partial replacement to allow small car access. - Due date: Flexible

Fence line is 40m in total. Open to either new wooden fence or colorbond. Old one is falling apart and as a small section of it (about 15m) surrounds one edge of the pool area, we will need this done properly. See images below. - Due date: Flexible

I need someone help with installing DIY blade fence 4 x panels. Panels are to be go on top of the existing retaining wall brackets. - Due date: Flexible

Needing to replace the metal wire fences along the boundary with neighbours with a 2m high timber butted fence. Approx. 50 metres in length. The pool fence along the driveway also needs to be replaced with a 1.2m timber picket fence (see image as reference). Approx 13m in length. Will need two pedestrian gates - 1 on each side. Will be ready for the job towards end-June. - Due date: Flexible

Looking for someone to help install our 9 metre long pool fence into our slab. It is a standard black aluminium pool fence (will pick up from Bunnings) with a few custom poles as follows: - 2x 1.3m high vertical poles (standard pool fence posts - bolt in) - 3x 3m high vertical poles (custom steel posts - cylindrical footing for core holes - already drilled 400mm deep by 80mm wide) - 4x 1.2m high standard aluminium pool fence panels The core drilling will already have been done and all the posts and fence panels will be provided (or can reimbursed). I can reimburse for all fixtures and epoxy needed. Looking with someone with experience with both core drilled and normal fencing. - Due date: Flexible

Need to make treated timber swing side gate. Roughly 1.8me high and 1.2m wide. - Due date: Before Wednesday, 19th Jan 2022

Removing a brick fencing pillar by using concrete cutting tool (service provider to provide if possible) and fix an aluminum fencing post onto the existing brick fence. - Due date: Flexible

Need quote for concrete fence with slats and also automatic gate on the road front.Fence length 25m approx. without gate, fence gate length 4m and height 2.1m.There is a fence currently in place in the from of the house and I have attached the picture to match. Please provide quote for both material and installation - Due date: Before Monday, 28th Feb 2022