Find experienced local fencing contractors in Kedron

Not sure of price. Wanting quote for supply and install of new front fence and electric gate as well as a quote just for supply and install of electric gate. Preference is for white timber fence to go with style of Queenslander home. We think we will need a bifold gate. Photo of front of house with measurements for reference. Looking for something similar to the existing style, but taller

I need approximately 10 picket fence piling replaced on my front fence. Old pailings need to be removed. Some are fixed to metal, others straight into timber bearers.

Bifold stair gate 1000 x 60

We have two wodden gates and the gate latches are not lining up and one of the latches is missing.

We need a fencer with a QBCC license and examples of other work to supply and install a colourbond fence to our rear boundary of 13metres. Colourbond fence | Trimline profile in monument. The fence needs to have a 150mm gap at the bottom with no timber sleeper. We need the wire mesh fence currently insitu to be removed and the colourbond fence fixed into the concrete sleepers already in ground and that the current fence sits on. Needs to be qualified, have previous examples of work and cost $180 per metre. - Due date: Flexible

We need the horizontal piece of timber that joins the fence to gate replaced and the hinges re-installed. Gate is 176cm High. - Due date: Before Friday, 1 December 2023

Damaged wooden fence panel needing repair asap, 1800mm width, 750mm height, two horizontal slats need replacing, two fence posts that connect to besser block pillars may need replacement, vertical slats can all be re-used. Price range $200-$300 but can discuss. - Due date: Before Thursday, 21 September 2023

• Supply and install Hinged gate approx 1800mm high x 1000mm wide, on box steel frame, with vertical timber battens (42mm x 42mm H3 pink pine Primed LOSP) at approx. 70mm centres, & including latch • Opening size is approx 1900mm high x 1050mm wide • Exclude painting • Gate to be mounted off existing rendered block work • Photos show location for front gate to be installed, and an example gate in our yard we would like this matched to. - Due date: Before Friday, 8 September 2023

1. A small slab of cement with one edge curved so that three wheelie bins can be stored on slab. 2. Measure, purchase and install a gate. 3. Fix a gate. 4. Fix an edge trim "lip" Best if you come look at the job and provide me with a quote - the budget I have stated is not an estimated cost, I placed this number as AirTasker doesn't have a quote me model. All materials are obviously to be purchased by me upfront so that you are not out of pocket, and based on your advice on what is needed. - Due date: Flexible

Looking to build a relatively simple wooden gate. Purpose of gate is too keep dog from accessing side of house. Measurements are 1.4m height and 1.06m wide. There is a retaining wall that the gate needs content with which approx 60cm from the wall. Photo of area currently with temporary fence attached. Please quote for work. All materials will need to be included in Quote. - Due date: Before Saturday, 15 July 2023

We need our 1.8m fence extended along the side where the panels and lattice are, and across to the side of the house. The gate would be located in the part adjoining the house (to replace existing black pool fence). Fence will need to be built standalone, and must not be attached in any way to neighbour’s fence. No need for painting, just plain timber (or we are open to other ideas). The main object is to contain an escaping dog. Thank you! No painting - Due date: Flexible

Seeking quotes for supply and install of a 2.1m high chain wire fencing in grass yard as per sketch attached. Total of 70m of fencing with 4 x gates (2.1m H x 1m W) Top rail and bottom rail fencing. This fencing will create secure dog runs. Open to best fencing options. Site visit essential. - Due date: Flexible

After removal of a metal/wire fence along rear boundary line ~15-20m long and replacement with a 1.8m timber fence.

Need a chippy or fence builder with a circular saw to trim 100mm off top of 25 metres of timber fence pailings to make them even - Due date: Needs to be done on Sunday, 5 February 2023

The latch arm keeps ripping out of the wood of the gate. The wood in that part of the gate seems rotten, and the latch itself may need to be moved, or even that piece of wood may need to be replaced. Please see pics.

I would like a fence built (5.4m) with a gate. This will join the existing two chain wire (black) fences. I would like the area pictured to be enclosed with a gate (1.1m) on the top side. The fence will need to match the existing black fence already in the area. Material will need to be supplied. Experience required. - Due date: Before Sunday, 8 January 2023

Corner post of glass pool fence requires replacing or straightening. - Due date: Flexible

Corner post of glass pool fence has pulled away, creating a gap. The post will need to be straightened or replaced. - Due date: Flexible

I need a 15m wire and wooden fence built with a pedestrian and sliding automatic car gate. Also with a concrete edge underneath the fence and gate. - Due date: Flexible

Remove 1 x timber picket fence panel and rebuild into a double gate. Replacement of 2x broken hinges to 2 gates. - Due date: Before Wednesday, 31 August 2022