Find experienced local fencing contractors in Melbourne

The job is to extend the existing creeper wire construction. The current design is diamond shape. We would like this to be extended to the left upper section of the wall. Approx 600mm x 4000m. Photos attached for further details.

Remove wooden bamboo screening which is attached to aluminum fence. All wooden material to be removed. Discard all of the screening waste. Paint the remaining aluminum fence dark grey

Have this bamboo panels with their jute tie things disintegrating and the panels just came off. I was hoping to find someone good with tools to possibly fix them up. Have around 7 panels. :)

The garden gate is catching because tree roots have got in behind the jamb and forced it out. Wooden jam needs to be removed and replaced after cutting off roots underneath

We would like someone to take down our old fence (discard it) and build the same fence (replace like for like). The fence is approximately 5.28m in length and 1.6m from the ground (you will need to provide materials which will be included in the quote). You can see the length of the fence in the picture. Access is easy. no neighbours to worry about and there is plenty of clearance.

Supply n install 6-8 star pickets and wire to garden fence

Supply and Erect a pailing fence 7.5 m x 1.5m dividing front garden. The whole fence will need to be built in two section as there is a tree approximately half way. - Due date: Flexible

Need fence around pond can just be temporary small metal fence just don't know where to sauce to side It's around 2000m x 400mmy - Due date: Flexible

Install 2 steel posts 100x50x4000mm Concrete in at least 900mm length with finished height of post to be 2700mm. Will need to be cut to correct finished height. + Attach 4 steel mesh trellis panels to posts (brackets and screws provided). Air tasker needs to dig holes, set posts, provide concrete (and gravel base if required). Attach 4 mesh panels to posts with 4 brackets per panel. I will provide steel posts, mesh panels, brackets and screws. Photo of mesh panel and bracket attached for reference - Due date: Flexible

We need a fence panel replaced as you can see our neighbor's dog has damaged our existing fence. We would also like a new post added to help the fence leaning (neighbors dog causing lean on the fence) You will need to supply all materials 2.4 m Height fence. This week!!

I have 8 metal screens 1800 x 900mm (10kg) to be attached to my 6ft paling fence . This is a 2 person job - Due date: Flexible

I need 3x metal down posts concreted in to ground and then 2x cross rails (timber) to be added to create a frame that matches what’s already here and hng 6x fake vertical garden panels - Due date: Flexible

We have a rotten, timber, garden fence which needs dismantling & replacing. The new, treated pine fence needs to be 523cm long & approx 200cm in height. - Due date: Needs to be done on Thursday, 16 February 2023

Looking to replace an existing timber fence, 8m wide, and to be around 2m high. Inclusive of rubbish removal. Very basic fence, it backs onto the back of my property for storage, and is the back garden fence of a rental property. - Due date: Flexible

Supply and install a gate with lock between house and side fence. the gate should match (and be keyed alike to) the current gate on the other side of the house. The gap is just over 1m. I dont really know what this should cost so i am looking for quotes - Due date: Flexible

Looking to install supplied iron gate in garden as entry to my hen house. Gate is 190cm high, 86cm wide and tallest hinge is set at 150cm. You will: 1. install two timber posts (dug in but no concrete please), 2. hang the gate on one of the posts (original hinges supplied by me) 3. drill a hole on the other post for the latch (which is already attached to the gate) I can supply the posts (thinking 100mmx100mm square) or you can supply for reimbursement. Optional depending on budget is to install a top panel on the gate posts to act as an arbour. Picture of supplied gate is attached (black iron arch), as well as install concept/ideas.

Strong winds blew the trellis over and now it needs to be put back up and strengthened. Timber supports along the fence have snapped and broken pieces will have to be removed and replaced with new wood. There are about 6 supports mounted to existing fence posts. Prefer to keep plant as it’s taken a long time to grow but it may need to be cut back. Work needed asap

Build and install two mesh panels 1 metre x 6 metre with cypress pine and wire mesh

Garden gate frame is in good condition, want to change the wooden planks and wish to have horizontal wood planks instead of vertical ones, no need to change the frame. Western suburbs and size of the total gates is 4mtrs, need quote with price details. The wood is nailed. Thanks

A 30yr old Staghorn fern with dimensions of 120cm width and 120 height has fallen off garden fence. Needing someone to please come and securely put back onto fence.

Our small dog is escaping through the gaps in a very old rear fence. We want to patch up the holes in the fence to stop the dog escaping

Metal gate to be attached to balcony railing with a timber post to be added for the gate to hold onto

Hi, I have weatherproofed my cat accessories. I need them to be drilled onto my fence. Obviously will need to ensure the screws don't stick out (will affect my neighbours side of the fence). See images. One back fence is about 7m. And the two side fences are around 2m. So lots of space to work on.

I need someone to purchase a lattice fence topper and a cat roller barrier from Bunnings (I will provide details) and attach them to the metal back fence in my courtyard. The job also involves cutting down a couple of small tree branches and repositioning a small post. - Due date: Before Monday, 5 February 2024

I have an existing timber paling fence with an old 2 panel gate. I need the old gate removed and replaced with a single gate approx 1.5 m wide. (custom to fit the existing opening) Locks to be relocated from the old gate to new.

Looking for someone to repair the gaps in my back fence and put in a temporary/removable solution to stop a dog from getting under the gate - Due date: Needs to be done on Wednesday, 20 December 2023

Handyman needed to construct cat proof barrier along the top of a pre-existing fence. Get in contact & I can send some photos and measurements through. - Due date: Flexible

I need someone to install the following to my fence so my cats can’t escape. Please see link of the product. https://www.stratco.com.au/au/fencing--screening/colorbond-steel-fencing--gates/good-neighbour-fencing/good-neighbour-accessories--extensions/oscillot-cat-proof-fence-diy-kit-2m-slate-grey-lg-40120/ - Due date: Flexible

We have two dogs that love to run and ruin our garden, I need someone experienced to build a basic fence around 16m. The perimeter is between balcony and garden. The fence will need to be high as the dogs can jump. We don’t really want it to be permanent as we plan on building a rain Forrest style garden. We need expertise as well as labour so please help! - Due date: Flexible

create a fence with a gate and the other fence is just for the side of the house - basic with bamboo cover - Due date: Needs to be done on Wednesday, 7 June 2023

Need to supply, cut and screw in some chicken wire or similar to stop dog to get out of gap along wall. Gap is bo more than 10cm wide. The Run of the wall is around 15m.

Hi, I purchased wiring to make my back yard cat proof. I need this installed into my back garden and side area. https://www.smartcatsstayhome.com.au/products/cat-proof-fence-50m-timber-fence-installation-pack

Need someone to build this dog kennel from Bunnings please

The slats on my dogs kennel keep falling though. The frame is a bit wobbly (it was a flatpack i put together myself) Id like someone to please stop the slats falling through and maybe reinforce the frame to stop it moving.

Post required to be made 180mm x 250mm x 2700mm in smurf mist colour. Prices in aluminium and steel and i need a total of 6 posts

Looking for someone who can dog-proof my back gate so a small dog cannot get out under the bottom of the gate. I need gate to remain functional - needs to be able to open and close. Please see attached photo. Can adjust price for initial quote if you first want to have a look to explore options.

Supply and install colorbond fencing and sliding gate. Side fence approximately 4 mts long and sliding gate side approximately 5 mts long.

Colour bond fencing Three panels of colour bond fencing Totalling 11 meters all up

I need a price to remove the old timber gates and supply and install new colour bond gates on existing posts opening is around 1860mm and height 1800mm is fine

We need a colourbond fence panel screwed back into place. This is urgent.

Replace the existing fence with new Colorbond sheets. Required: Approximately 18 linear meters (1.8m high x 10m length). Material: Colorbond sheets, posts, rails, and concrete. Ensure proper alignment and secure installation of posts and rails. Looking for an experienced fencer capable of delivering a high-quality job.

Need a secure side gate installed at my townhouse. Length of gap is about 97 cm. Ideal height is 2M Alternatively, this side pathway just needs to be secured with a temporary barrier of the same height and width, as we are renting and have a 1 year old and we are getting a dog.

Old brick fencing is tilted, want to replace it with colourbond fencing please. We share our fencing with the housing commission next door, need the housing authority to agrees with the Quote, they will be arranging their own Quote too.

Remove and replace a rotten Victorian veranda post.

Fix colorbond fencing - only licensed contractors

Rivets have come out of fence at rear

I need someone to supply and place 2.0 meters of Ocean blue colour bond fencing. Site will be prepared. Posts and CB fencing will need to be supplied and installed with associated attachments. It’s only 2.0 meters to join a new roller.

Install trellis mesh along a 9metre x 2.1 metre high colourbond fence. There is a concrete retaining wall at the base of the fence. We will pay for materials on top of labour.

Colorbond fence is in good condition overall, but too much weight/force was put on one post which loosened it and the footing slightly. May need to repour concrete footing to stabilize this one post. Soil garden bed on my side, small metal shed on neighbours side. Pipe and electrical conduit close by but can be avoided. Wire trellis and creeper plant can be removed if necessary but not in the way. Location of loose post highlighted yellow in image. - Due date: Flexible

Fence was damaged due to trees encroaching, trees have since been cut down and fence now requires replacement - Due date: Before Saturday, 10 February 2024

I have two hard plastic lattices I need attached to a concrete fence and colorbond fence - Due date: Flexible

Colour bond fencing needs to be done . - Due date: Flexible

Need to demolish (leaning) brick fence and remove foundation and dispose of all debris, then build a new fence and gate, possibly colour bond but open to suggestions. Qualified/experienced fence builders only. - Due date: Before Sunday, 17 December 2023

Erecting a colourbond fence on ourside of the boundary roughly 6 metres in length charcoal grey in colour with lattice on top height from about 5 feet to 8 - Due date: Flexible

Require roughly 8.130 meters fencing inclusive of gate - Colourbond Jasper. Standard height (2100mm) Removal of current hedging will be completed before fencing is required. Scrrenshot below has existing ~8M fence in black and new shape in green. No drop on land - pretty level. Easy access both sides. - Due date: Before Thursday, 17 August 2023

Remove 2 current wooden fences and replace with 2 new colorbond. Each fence approx 3.8m wide. Easy access but might have to dig out a couple of plant roots. - Due date: Flexible