Find experienced local fencing contractors in Morningside

Replacement of 10 or so rotten timber fence posts Detach rails/palings, remove posts and associated concrete, reinstate new posts/concrete, reattach rails/pailings The fence is a boundary fence between two properties and is on flat ground

Remove existing glass pool fence and re install with new spikets. Additional glass will be required. Pool area is being extended. Glass was installed 1.5 years ago. I want the spikets cored and grouted into the concrete. New concrete will be installed soon.

Summary of the task: Supply and install wood fence with gate/s. Quotations needed separately for each item below with specifications of timber (eg, Pine/hardwood/ dimentons of pailings etc) 1.Front: 13.3m length 1.5m high picket fence with 2mm gap + lockable 3m gate with lockable 0.9m small gate (back of gates should be steel framed) 2. Back: 10.8m length 1.5m high picket fence with 2mm gap. This should built on hard wood sleepers , lockable 2.9m gate, (back of gates should be steel framed). 3. Side fence: 2.8m length 1.5m high picket fence with 2mm gap, lockable 0.9m gate 4. Remove and dispose existing fences ( current fence height is less than 1m) 5. Apply white painting

Timber retaining wall section has rotted and needs replacement. Approximately 400mm worth near a pool area.

I have wooden posts and some chicken wire to be removed. I have a free dump ticket.

I need to install around 40m of PVC fencing (mix of 1800, 1500 and 1200mm + 4 1200mm gates) on a timber (pine) retaining wall. I will purchase the fence but may need assistance in verifying I have all the required parts. I will add images later on to show the retaining wall.

Our home has an old metal fence which sits on our boundary. While some of this is behind trees, much of it is open/exposed. This runs one side of the property boundary only, about 30m. We are looking to remove the metal fence, please. Whether it is possible to remove all of it, or parts only.

Timber fence has 5 posts that are directly fixed to a small timber retaining wall. The wall has moved a little (some time ago) so the fence is leaning slightly. Would like the 5 posts fixings to be removed, insert a small timber shim piece and re-fix so that once the posts are refixed the fence is straight again. There are also 2 additional posts that are concreted into ground (so a total of 7 posts all up) these would need to be cut off at top of retaining wall and 2 new 50 x 50 galvanised RHS posts be installed.

Just have a single fence panel measuring approx. 182cm x 10cm that needs replacing due to being damaged - Due date: Needs to be done on Saturday, 13 January 2024

This will required 5 additioal fence poles to hold the panels. These can be installed on the other side of the fence as we are doing this with the neigbours. Red area in attached photo is where we want the screens to be installed. All materials will be paid for seperately. The quote is only for the task. - Due date: Before Friday, 20 October 2023

We need an L shaped timber retaining wall built along the back and right hand side of fence. Approximately 9 meters along back fence and 8 meters down right fence. Approximately 1 meter deep and 0.5 meter high. Quote is for labour. We can purchase materials separately. - Due date: Flexible

Demo approx 25m,1.8m high timber fence, remove post, stock pile on site or can pay extra for dumping for an agreed extra price. - Due date: Needs to be done on Monday, 21 August 2023

We have dogs and an enclosure needs to be erected for them. We require someone to quote on doing the job. You will need to purchase, supply and install the materials to complete the job. - Due date: Flexible

Need a small fence built. Simple white picket 4m long. We have all the wood just need screws and fittings. Should only take 2 hours - Due date: Flexible

- Supply materials and install neighbourhood fencing on new property - Refer to attached photo for fencing style reference - Due date: Before Sunday, 23 July 2023

The colorbond post has been hit by a car and is bent, which stops the automatic gate from closing as the post and gate are not aligned. This need to be either fixed or possibly replaced - Due date: Flexible

Seeking a quote to repair/replace my front timber gate and some fencing at the back of my property. GATE Retaining the current timber style to match the front fence, preferably durable steel tubing or white powder coat frame, can pick up on existing hinge holes or make new ones whichever is stronger, supply and installation of new "Gatemaster Superlatch Digital Lock SLDS for timber” or similar (happy to discuss & take advice). FENCE Will require on-site visit for discussion and advice on timber fencing around pool area. Approximately 20 metres in length down the sides and 10 metres across the back of the yard

We are in need of a new timber gate at the front of our house. The existing gate is the wrong shape and height. The new gate should match the height and timber pailings of the fence and should be able to be padlocked. We are happy to paint once installed. The fence height is 1.5m and the opening approx. 2.55m Happy to resuse the existing metal gates if more economical - Due date: Flexible

Supplier cannot do in time so we need someone to supply and build boundary fence to 1800mm high. LHS 25.4 LM. 19Lm on retaining wall with fins already installed and 6.4Lm in ground. RHS 36 LM. 28Lm on retaining wall with fins already installed and 8Lm in ground. You will need to be fully insured and licensed. These will need to be provided prior to starting onsite. - Due date: Needs to be done on Tuesday, 2 May 2023

Hi, I need a quote to repair front fence. Two front gate posts need to be reset/ replaced in concrete to support existing gate. Thanks.