Find experienced local fencing contractors in New Farm

Large 2.4m tall fence requires straightening and re-fixing of post in concrete. Posts appear unbroken but footing has come out resulting in fence lean which is slowing pulling the entire fence over. The posts are on the side of the fence at the back of a tall hedge – so a smaller working area that is also on a slope. I require a quote setting out work required and materials to complete the job.

Replace the existing front gate. Needs a new metal frame and timber palings. Size: 1.23mt wide x 1.660mt H (at highest point as the gate has a camber)

Needs to be colour matched to car, a few cracks and scratches that may need to be repaired

Need a replacement glass gate to match current frameless glass pool fence, as the previous one broke. About 1 metre across and standard height. Supply and install. Will upload photos shortly

Supply and install pedestrian gate 1000mm H X 900mm W in existing 1100 mm high fence next to automated swing gate. Photos of existing fence attached. Ok to make a gate from the existing fence panel. OK to order a new gate. Ok to attach gate to existing corner post if appropriate. The profile is very like the Protectoral DTR range. We need self-closing hinges and an ordinary gate latch, plus any other necessary hardware.

looking for someone who can install a 1200x1200 glass pool gate. will need post put into concrete and then latched onto something on other side. preferably you go buy what is needed from bunnings. task is for labor only , will adjust price for the cost of goods. need someone who has done it before. thanks

I need 4 or 5 hardwood posts to be replaced and concreted into the ground, one next to mail box possibly just requires more concrete to sure up. Posts to be connected to exisiting fence, and where possible/needed the existing fence should be fixed up. If you also offer painting for this, please let me know how much it would cost. I can DIY painting if needed. Requires ABN.

Glass Pool gate is not closing. It is neither swinging shut nor latching by itself. You will need to ensure it closes and latches as per pool gate requirements. - Due date: Needs to be done on Friday, 19 January 2024

We want lattice and shade cloth installed above our fence. 5x1.2m and another section 1.2x1.2m. Dark green shade cloth on both sides. Also want new / matching shade cloth attached both sides of an existing section 2.5x1.2. New farm location. You buy / provide materials and labour, want don’t today / Tuesday preferably. $800 total job probably needs 3 of these from Bunnings $50 per panel - https://www.bunnings.com.au/lattice-makers-2400-x-1200mm-treated-pine-lattice_p0362692 - Due date: Flexible

Building of a new 12m fence with a 3m gate. 7 posts in total will be required. The old fence and overgrown plants will be removed before you start, the area will be clean and ready. Please quote for labour only as most of the exiting pailings and the gate frame will be re used (new posts and some pailing will be required and i'll supply or pay for them separately).The photos are just to give you an idea of the site. easy access and parking onsite. no painting needed. - Due date: Flexible

Timber palling fence repair and gate repair. Many posts and palings in good condition and do not need replacing mainly the frame and palings. Long side fence (12m) + Driveway 3m gate + Small gate + short side fence (minor palling repair) - Due date: Flexible

Front fence with metal insert replacement - - existing wall 700mm high - length of property front approx 12.5m with rendered brick posts.(see photo). Want the fence/gates to have vertical slats on the existing rendered brick (posts would need more height ) taking fence to 2m . Will Need a new slat doorway gate and automatic drive way gate . Driveway gate is to be widened about 1m .See final photo of finish we want - Due date: Flexible

We have one strip of old fence (the length of our property) that has a few gaps. I’m hoping to find someone super handy, who could please come out, look at what needs to be done and then get the materials and repair it. We don’t need anything fancy as the fence will be torn down in the next year or two. We just need to keep a dog in. Thanks - Due date: Before Friday, 4 November 2022

Build Timber Fences, Remove old timber fence, drill holes for new posts and erect timber fences approx 2x 20m lengths on either side of house, they will be approx 6 feet high. - Due date: Flexible - Due date: Flexible

Install fencing and gate. About 20m I can supply goods - Due date: Flexible

Instal a new chain wire fence, 6.5 metres and 120 mms high. Standard galvanised finish with a diamond size of 60 mm. Also remove old wooden fence that has fallen over. - Due date: Before Saturday, 26 March 2022

Would like to replace 11m of timber fence pales across 3 sides - 5m, 3m and 3m lengths and 2m high. There is a fence already there but it's only 1 m high in parts so will require posts extending and railing installed to accommodate 2m pales. I need the current pales removing, posts extending were necessary, railing installed and new 2m high pales installed.

Hi, I have a metal fence that I need removing and transporting from New Farm to Tingalpa to get powder coated. Fence is in 6 panels of various sizes (up to 1.6x1.9m) and there’s the front gate and 2 posts.

Front stair palings needing replacement. Note, the wet weather has caused further wood rot so please quote per paling as well as entire area.

Wanted a steel frame, mesh fence and two gates fabricated There are 3 sections between concrete pillars I want both left and right to have full size gates swinging outwards and the centre a fixed panel Dimensions are Gap 1 - 188 H 231 w - swinging gate Gap 2 - 188H 176 w - fixed panel Gap 3 - 188 163 w - swinging gate I’ve attached a sample photo of what type of fencing I want Thanks