Find experienced local fencing contractors in Noarlunga

Looking for a fence installer to do my garden's fencing. I want the fence height around 1 - 1.2m. I also need some advice on if I should only do one side (around 10.5 meters)'s fence or two sides (around 10.5m x 7m) etc. etc. Material requirement: aluminum slat. Thank you.

I need a small gate 920x 120 CMS installed in a section of my garden.

Needing someone to install a gate separating our garden from the front gate on a good neighbour fence to keep the dogs out. Unsure on what Is a reasonable price. - Due date: Flexible

Hi. We are needing someone to Install fence screening for our backyard. Open to offers.

Hi! We need help to replace our garden picket fence. It is: 1220mm (H) x 3000mm (W) with one gate in the middle. Approx 3-4 posts will need to be replaced. We would like the replacement to be similar to the existing fence. - Due date: Flexible

it'll be two sides as the other two side are my house. One side to be 6.4 meters in length and the other side to be 7.4 meters in length. They hight of it should be 4 foot - ish. One side must have a gate. - Due date: Before Monday, 19 February 2024

HI, existing fence that we want to extend. Current fence has horizontal colorbound panels. Want to finish it, extra 13m that i have calculate as extra 5 panels and relocating one current panel and fence. Happy to get quotes of the materials and installation or only installation Thanks - Due date: Flexible

Install side gate (colourbond infill and gate)

5.4m length of brush fence to be replaced. Materials can be provided. Happy to negotiate.

About 3m of colorbond fence that was taken down and needs to be re erected in a different place in my front yard. Fence and posts I already have on site ready for installation. Only materials required should be a bag of concrete to secure posts? Small job For skilled handyman or ex builder? Maybe 2-3hours work?

Woodland Grey colorbond gate installed between house and fence. Ideally as wide a gate for access as possible. 1850mm between wall and fence. Quote to include material cost and purchased by installer. Not sure how much it will cost so happy to negotiate.

I am looking for someone to come and quote the cost to install colorbond fencing.

Metal fence in between two units to be moved back and metal Gates on one side wide enough for car to enter . Small entry gate on other side .

Colorbond fence needs new posts and concrete blocks underneath. Panels are ok to re use.

Fence rails have rotted and need replacing. I have purchased new rails and fixing hardware, so just need someone to replace them and re-fix fence panels to new rails. Easy job for someone with fencing experience. My budgeted figure includes your Airtasker fee. - Due date: Before Friday, 23 February 2024

We need installers for jobs across Adelaide. White Card & experience required. This job is to install 29m 1800mm high colorbond fencing to be bolted to concrete ($750) plus concrete 12 posts in the ground for gates ($780) - Due date: Before Monday, 29 January 2024

Color bond fence panel and post blew down in last night’s storm - Due date: Needs to be done on Monday, 11 December 2023

Need to install a colourbond fence around our bins. It’s approx 2m x 1m and needs to be high enough to just cover the bins. It should include a gate to be able to get the bins in / out. - Due date: Flexible

Replace old rear fence with new colourbond including post and rails. Approx 15 metres long - Due date: Flexible

Quote for a Post and rail colourbond fence repaired /replaced .17mtres - Due date: Flexible

I have a collarbond fence that a few panels need to be replaced UPDATE... I need someone who is an actual registered business in the fencing industry - Due date: Flexible

Purchase and erect 1.8m high Colorbond neighbourhood fencing over 23m. Fence will be in backyard on dirt. Please indicate in quote depth of footings, whether into concrete and whether a ground level plynth is part of the construction. (Images of location to come) - Due date: Before Sunday, 12 November 2023

The bottoms of the three good neighbour (Stratco) posts have rusted and need replacement - two back-to back posts (concreted into ground) and one against the brick pillar/gate (doesn't seem to be in the concrete). The panels are in good condition will need trimming about 5 cm to accomodate adding a steel post between two good neighbour posts (reinforcing). We have purchased all the posts (three good neighbour and one steel 5x5 cm) and ready for the works. Concrete to be provided by us upon your quantity confirmation. - NEED for the Airtasker traddie: - take down two panels while peforming the works on posts - break and take out concrete - remove existing 3 good neighbour colorbond posts - confirm how much concrete mix we need to provide for works - concrete the three new good neighbour and one steel post into ground - trim the existing panels for about 5 cm to allow for additional post insertion between two back-to-back good neighbour posts - once the concrete is settled, re-affix the previously removed (and trimmed) panels to the new (and existing) posts NOTE: we will dispose of old concrete and other waste materials Easy access as per photos. Flexible with times for the work to be undertaken. Fence/post photos attached. Please ask for clarifications if required. - Due date: Flexible

- remove existing 3 good neighbour colorbond posts and replace them (posts can be provided) - concrete the new posts (you will need to supply concrete) Easy access as per photos. Flexible with times for the work to be undertaken. Photos attached. Please ask for clarifications if required.

We wanted to replace our old fences with the new colorbond fence. - Due date: Flexible

A panel of our back fence is wobbly and I think that the weld in the post is broken. It is on the neighbours side so I can’t see it properly - Due date: Flexible

I would like an experienced colourbond fence installer to quote on doing a 'good neighbour' fence.