Find experienced local fencing contractors in Oakleigh South

Required to repaint existing picket fence .. approximately 48m length, of which 45 m is 1-1.2m tall & 3 m approx 1.5-18 m tall. The 3m length (1.5-1.8n) is currently unpainted, remaining 45m is already painted since many years & just needs refresher coats

Would like someone to supply and install fence extensions. Had this in mind from Bunnings -- "Matrix 2400 x 600mm Charcoal Rainforest Fence Extension". The fence is about 14.5m so will need 6 of these panels. Task price is for labour then happy to reimburse Bunnings costs on top of that.

Fencing needs post to be mounted on 3 places to support the existing fencing which is slanting inwards

Our back fence is leaning into our back neighbours house and is not secure. We need it to be straight and secure. The fence itself is good but the foundations are not strong enough to keep the fence upright.

Need new colorbond fence to be installed for 4.5mtrs width and 1.95m height.

New picket fence Please see photo

Our existing picket fence is falling down and needs to be replaced asap. Its imminent collapse is the result of branches and creepers, and the irony is that the fence is not only about to collapse under their weight but that they are currently holding the fence up (or stabilising it). We will require someone to come over to provide a free quote based upon site inspection. Note that the picket fence separates the backyard garden from our garage and/or driveway (as opposed to the house and street).

Fence was damaged by the winds today and need someone to fix it

I want a small wooden grotto to be built in our front yard. The grotto will house a statue of 80cm. The foundation should be 1m x 1m and the height needs to be 2m. The statue will be placed 500mm from ground. I have attached the photo of the statue and the wooden grotto that we prefer(Bali hut type).

I want to install a new fence and two manual gates in the entrance with the lock I would need someone to measure and provide a quote. The frontage is 15m. I want to get it done asap.

Two panels are broken and needs to be repaired . See photos. Please quote including materials and airtasker fees

I want to install colourbond fencing and sliding automatic gate and a pedestrian gate could you please provide a quote . The frontage is 15m. 6.3 x 9.3 and 1.5 height

Looking to replace my old pine fence with a new and similar one. Located in the front of the house. 27m length 1.6m high Removal of old fence No gate needed

Need a brick fencing done at 1.8m height and 4m long. Need to remove the exisiting brick fence too

Replace a 15.8 meter long fence in South Oakleigh VIC Take away the old fence waste.

Hi, Looking for a qualified fence builders to replace my fence. Please include quotes for both colourbond and wooden fence. Thank you

Small gate to match existing fence installed to keep my dog in front yard safely. Materials provided by trade person. Measurement 86m high, 106cm long, space from house to existing fence.

Hi - looking for someone to come in-person and provide a quote to supply and install motor for fence automation. This would include installing a power point. We have 2 driveways and one of them has automated fence. Looking for the other to be automated in a similar fashion. Approximate distance between both the fences is around 8m Refer to the attached photos. - Due date: Needs to be done on Saturday, 21 October 2023

We have an existing fence - we want to extend this. We are looking for someone to quote on: a) installing poles - we will purchase these. Please quote on cost of concrete, labour, etc. This will require 9 poles being installed - 6 in ground (height out 1800mm, depth of 600mm), one against wall of house (can be in ground or bolted to wall) and 2 where there is concrete (these can be cut in or bolted). The placement of each pole will be provided, so that fence panels and gates can be added. This is our the first part of our fence install - panels and gates are 2nd. And if you would like to quote on fence as well: b) repurposing some of the existing fence for the panels between poles. This will be three sections that are 2900mm, 1600mm and 800mm. c) installing gates - we will purchase the frame, but matching panels will need to be added to match rest of fence. This can be quoted on. d) creating new panels for one (4-5m) section of the fence - materials will also be purchased - to match the existing fence style. - Due date: Flexible - Due date: Flexible - Due date: Flexible

We want to put fencing in the front yard. The frontage is 15metres. We want to get it done in a few weeks if possible or within a month. - Due date: Flexible