Find experienced local fencing contractors in Parkwood QLD

I would like to have both the Colorbond and timber parts of this fence repaired (images). Thank you.

Require a boundary check for fencing to be replaced to check the existing fences are correct

Fence,, new build. Colour bond

Corrugated steel roof & colourbond fence was damaged during a storm. - Shed has multiple roof panels damaged and one panel on the front - Fence has 1 post damaged and a panel missing, plus top railing, etc Photos attached

Hello due to recent and ongoing rain my fence is damaged and needs attention. Looking for immediate help with the task

Need retaining wall done and also replace wooden fence with colorbond fence

Build timber fence (treated pine) extension to be installed on existing colorbond fence as per photo. Install on one side of fence only. Solid timber 100% privacy 2 x ( 2400mm x 500mm) Quote for materials, build and install

Latch on colour bond fence is not lined up properly and needs to be moved

New side pool fence gate and compliance certificate - Due date: Flexible

Need to install a colourbond fence. - Due date: Flexible

We want to install a new fence out the front of our house. We wanted someone to come over and help us measure the boundary of where we can install the fence to. We have the land subdivision doc from the titles office with the exact measurements but because we are in a court on part of the circle it’s not straight forward for us to do. Its just for us, it’s not for a council application or anything like that, we just went to get it right if we can for our own benefit. We are home most of the time in Parkwood.

Colourbond fence 33 metres - Due date: Flexible

Install THREE metal posts with concrete footing for shade sails. Scope of works: 1. Dig THREE 350mm wide x 900mm deep holes on turf (soil ground) at the courtyard. 2. Pour 100mm of gravel into each hole as the base of the footings. 3. Place posts into the holes at a five-degree angle, using a level to check. 4. Support the posts using timber and clamps. 5. Prepare and pour properly mixed concrete in the holes. Owner to provide metal posts, shovel, gravel, concrete for the footing (concrete mix in bags from Bunnings or use traditional way blend and cement), timber support, contractor to use own tools for digging (such as Post Hole Pincer or handheld power digging tools) and use own spirit level or clamps for post support (if needed). Work location: Parkwood, can start the work next week. - Due date: Flexible

Summary: Repairs to Gate and fence next to house wall. The post that the gate is attached to is rotted and causing gate to lean. Currently theirs is a Small Fence from house wall to gate post, this can just become a fixed fence as this is coming off wall and can be fixed, upright post is rotted. Length Approx 400mm only, then the gate, to other support post. The timber pailings and 2 x posts need replacing as rotten and need to hold gate in place and allow to open / close without scraping. - Due date: Flexible

Supply and fix electricity supply line from supply box in the road to the house connection. Distance under 20m. Current line is located above ground and between timber panel fence. See under blue line on attached photo. To save time, I will complete required trenching to your specification if you tell me required minimum depth and width of trench. You must take away existing materials

fix 8m fallen fence to boundary - Due date: Before Saturday, 24 December 2022

Refix timber fence panels to posts and adjust / repair gates where ch have sagged - Due date: Flexible

It's a hardwood fence both sides of the property about 20m

Front fence with gate quote

I would like a quote for a new fence