Find experienced local fencing contractors in Pymble

Replace current front pedestrian timber gate.

Chain link fence was damaged by falling tree. Repairing needed.

1.8m treated pine fence. Approximately 35m into two sections. Demolish, remove and replace existing tence

The fence has a deformation and is leaning.please refer to the photos

Remove 2 latches to 1 pool gate,each spot welded to posts Install 2 new latches supplied by me

I need a 3 x 1.5 m wire mesh fence between a wooden post (boundary fence) and a brick wall at the side of the house with a "old-fashioned" gate in the middle. It can be wrought iron, galvanised steel or powder-coated steel but needs to be sturdy and heritage look. - Due date: Flexible

Remove old steel fence & gate. Replace with 2 wooden side panel fences and wrought iron gate. Need someone to choose the materials needed from Bunnings (we will pay for materials) and complete the job. We have the iron gate already.

Replace two Gates - the main gate is 2.9 metres and the smaller side gate is 0.85metres. May need to remove root - Due date: Flexible

Fix fence in the front yard. The fence got loose and out of alignment because something heavy dropped on it. Need to be retightened and restore.start on Monday

Repair or re-erect mash fence that damaged by a falling tree branch - Due date: Flexible

2 metal fences and gate to be installed - Due date: Flexible

we would just like to replace our back fence please - metal poles/posts can be left/used, just timber to be replaced - runners and fence palings - Due date: Flexible

We would like three new fences /gates built at the back of our house to match front one to enclose for our dog. Gate 1 113 cm clearance between two rendered surfaces Gate 2 109cm clearance between rendered wall and timber balustrade at 100cm height . Would you place an aluminium gate here? or maybe a timber one to match? Gate 3 164cm clearance one side rendered wall other stone retaining wall I have also attached a photo of our existing fence / gate we would like to match this one. - Due date: Flexible

Fence requiring replacement is approximately 6120mm length. A retaining wall may also be required. Note that we also need a other fencing done under the attached pool deck area. This could be packaged together with the fence replacement. - Due date: Flexible

I want to build an enclosure for the pool equipments using Louvre aluminium panels. Something similar to the attached photo.measurements 4800L X 1200D X 800 H - Due date: Flexible

Remove the picket fence by taking out/ cutting 5 posts. See picture - Due date: Before Friday, 2 June 2023

tree brance cut and fence fixed - Due date: Flexible

I have a set of two new wrought iron gates that measure 200cm (w) by 185cm (h) complete with two hinge posts. The hinge posts need fixing to the stone pillars that are at the entrance to my drive. Some stone will need to be ground / chiseled from the pillars to create a flat surface where the posts are fixed. The gates are heavy ( 100kg +) - Due date: Flexible

we need three dog gates built to close accesses, preferably in wood, same height as the terrace balustrade, two on the terrace and one around the corner shown at back in last photo - Due date: Flexible

- Colorbond Fence, supply & raked install 22m. - Colobond Gate ( 1m ). - Remove old paling fence. - Clear vegetation for Fence line. - Due date: Flexible