Find experienced local fencing contractors in Seddon West

Asap. Give me your offer. Someone cut the fence to access our containers. There's a gap now need to be filled/fix asap. The gap is about 50-100cm width and about 2 meters height, need to fill. If you have Temp fence or else it's ok. Location is Footscray.

Transport 15 fence panels and 8 blocks to Yarraville - refer photo

The side fence on my property is beyond repair and needs replacing with a new one. I’m looking for a fence that is 2m tall and 9m long.

Replacement of a timber paling fence at the back of house. In need of new fence. Approximately 8m long. Disposal of old fence required.

Fence has come loose from the retaining wall and needs to be secured. The concerte has been eroded where the joint was screwed in and I need another way to secure the fence which is leaning and moving in the wind

Need to install side fencing with one gate connecting existing fence and the house providing more privacy. Length is around 3.2m Height 1.8m

My Victorian house needs a front gate at the frontyard. The height is about 120cm x width 95cm. The frame needs to be in metal with wood pickets nail to the front. A fairly straight forward job. $250 is labour only. I will pay for materials if you provided me a recipe.

9m blade fence with brick at the bottom, or some retaining wood (there is a soil embankment that rises above the street level)

Repairing dents, rust and repaint my quarter panel

Replace paling fence and dispose the old one.

Remove fence in carpark. See pics. Any questions please ask away!

Hi, the job is to remove and replace an old timber fence. Length is 5m, height is standard (roughly 1.8m). One fencepost has concrete around it, the others are just in the ground. Access is good directly through the garage with wide garage doors either side. I have the neighbours consent but I am paying for the job myself. Quote to provide for supply all wood, tools and take away the old timber. Photos of old fence (to reaplce) and existing new fence are attached.

I need roughly 35 Meters of chain link / cyclone fence installed. With gates for vehicles. all to be bolted into concrete. Thanks

I have 1 standard kitchen cupboard door that needs a new door handle (supplied) measured and drilled in place to match the others and then reattached to its original hinges . (See photos, screws included in packet but will need to be shortened). Also I have 4 expanding wooden trellises with solar LED fairy lights attached, that need mounting onto an outdoor brick wall. They are 100cm wide x 180cm high with a solar panel at the bottom of each one. You would need to supply all tools/drills and any bolts/pins/brackets required to hold them in place. It needs to be a neat job, done by someone with experience. - Due date: Before Tuesday, 23 January 2024

In the wind my fence post got loose and needs to be dug out and redone. Can pay for post on top if needed. All other posts on the fence are fine. - Due date: Flexible

Hello! I have a side wood share fence, 1.9m high and 3.5m long approx. It has some old ivy attached. I’m looking for someone to remove the fence along with ivy and dig the ivy roots out. It would great if you can also replace the wood fence, but ok if you can’t we will just find a fence company to put a new one in. Thank you! It is in Footscray - Due date: Flexible

I'm installing a picket fence to replace a previous shallow brick fence. I require 8 post holes dug against the footpath for the picket fence posts. The previous brick fence has concrete foundations in the fence post locations that require removal. Small parts of the driveway and footpath will require cutting for the post hole. Post holes need to be 650mm deep. Also require removal of any excess concrete/soil/debris from the holes. - Due date: Before Sunday, 3 December 2023

Remove 3 x fence sections So we can assess 3 units to complete concreting works I will be on site to help lift them Photo of the fence sections attached - Due date: Needs to be done on Monday, 9 October 2023

Repair wooden gate at side of home. Gate is sagging. - Due date: Flexible

Require experienced pool fence installer/maintenance person to: 1. Remove and refit rusted 4x ground bolts on glass pool fence spigot (bolts have completely rusted away) - see close up photos 2. Adjust and check pool fence gate to ensure it closes smoothly 3. Check ground bolts on rest of pool fence glass panels - Due date: Flexible