Find experienced local fencing contractors in South Moreton Bay

Water pushed over fence - will need x 5 treated pine 100mm posts, approx 15m Acreage mesh, 2 bags concrete, misc nails, post holes dug by hand likely due to proximity foliage. Small section of pool fence vertical (supplied as per photo) to act as vertical grate let water through - Also check rest of fence line - some re-nailing wire etc Pi

Installation of automatic gate and fencing in front yard

I have a new Parcel/Post box that needs to be installed into a white wooden fence (as pictured). It can sit on the lower rung of the fence support on the inside of the fence. The top half of the mailbox will need to placed into the fence and a hole cut and the lip around the mailbox holds it in place. There may be some screwing/gluing involved as well to secure the mailbox so it doesn't get stolen and sits in place correctly. Shouldn't take very long with someone with the right tools. Pictures below indicate the front side of the fence and the back side of the fence. 5 minutes from North Lakes QLD 4509 at Mango Hill. Very flexible with when you want to do it. I'm home all day Mon-Thurs + Sat/Sun this and next week.

Need to legally secure pool fence. Job requires a post installed/fixed to secure the side fence panel. Gate needs to be able to close and a few of the fixtures and bolts need replacing.

Seeking qualified and insured fencing contractor to quote for supply and install of new 1.8m high, semi-privacy PVC fence at front property boundary and adjacent to driveway. Approx 16 metres in total with 1 pedestrian gate. Currently in place is a 1 metre high brick fence (beneath front hedge), and pool fencing with timber posts along driveway. Both require removal before install of new PVC fence.

Looking for someone to help advise, source and build a fence for our 2 acre property. Will need 3 access gates. Looking at 3k for materials. 5k for work which will also involve taking out old fence posts. May consider a 6foot fence at front to stop road noise and paddock fence around rest of the property. See images of the property.

Move current side gate forward to edge of the house, and repair moved fence section

We need 5 panels plus post spikes and a timber post taken out.

Supply and installation of small Colourbond fencing job. Area includes a 2.8m double gate, and 4.8m of fencing, 1.8m high Please see picture. Looking at image, fence is to go along red line and existing fence / gate to be removed. Fence will come 1.5m out from existing side fence, then across 7.6m to join onto the house. This 7.6m includes a double gate. Working left to right the measurements are, 2.4m fencing, 2.8m gate then 0.9m fencing to house. Posts to be included in quotes.

- Make and install a new wooden fence gate to match our exisiting fence gate. - Gate to run along the wooden beam at garden edge. - Turn existing fence gate to swing off brick at garage. It currently keeps getting stuck on the brick and difficult to open. Approx 2980 fence to brick side of house for gate size. Need weekday job due to weekend commitments.

Install fence came down from flood water that. Concrete posts in so it doesn’t happen again. All posts and rails on site 12 post roughly Escavator recommended as large posts Timber on site Will require concrete to set posts in Experience is a must Thanks

We have 2 fence jobs. 1) Frameless glass pool fence that is not straight, so gates do not close properly. 2) Colorbond fencebgate that is shofting, so the latch no longer connects.

Current pool fence needs to be repositioned and extended to incorporate new concreted area

I need approx 50 fence palings picked up from Bunnings at bendable and delivered to house in Warner

Need fence installer to sub contract

Timber fencing (paling) around the pool. Length - 25m (two sides). Hardwood. I have attached the sample picture of fence style I am looking for. Prefer two rails (900mm apart). Vertical slats go with 95mm gap. From the model picture, you can see the paling will be fitted with random height. So, the shortest one should be 1200mm from ground and other can randomly vary till 1500mm. Please quote your price

2 fence post have rotted. Needs to be replaced.

1. Buy 1.8 metres timber panels (I will pay material fees separately) 2. Cut timber fence panels to 600mm each (3 pieces) 3. Nail each piece into the existing timber fence (Blue squares) 15 metres total

Install posts for small retaining wall. 7 posts to install. Post holes have been dug and all materials required are supplied and onsite. I need someone to string line level and set the posts in.

Supply and construct an L-shaped fence frame. 1.2m treated pine using 100x75 posts and 100x38 rails. The corner post for the L-shape should be 100x100. No picket palings required as we will supply and assemble those - just the fence frame please. The job also requires digging 4 holes and attaching 4 post stirrups to an arch (see image) and move 1 metre into position and concrete into place. Note: Material costs for building this fence frame is estimated at about $1000. This task payment is for labour only. You will be asked to supply the materials. Fence length is 60m. Easy access to site. See images.