Find an experienced fireplace installation professional in Outer East Melbourne

We’re looking for an experienced tiler or handyman to help us with a fireplace hearth project. Scope of Work: • Remove old tiles +tile base and prepare the floor for new tile installation. • Extend the hearth area to new dimensions: 180cm x 80cm (current 140cmx35cm) • Install new travertine tiles (60x40cm -12mm supplied by us) – 6 tiles in total, plus 1 extra tile to be cut for a small patch under the fireplace. • Fill the travertine voids with grout and seal the tiles for a polished finish. • Ensure tiles are flush with surrounding flooring. • Must be done ASAP before Christmas please. Location: Seville, VIC Please reach out with your availability, experience, and a quote.

Install electric fireplace - 1200mm model. Installation manual can be found here: https://britishfires.com/aus/wp-content/uploads/sites/6/2024/08/BF_NF-870-1200-1600-1900_IM_AU_06-2023_A-LR.pdf Build frame against an existing wall (2.3x2.3m), plaster and paint. I’ve attached some photos for reference. There is already a plug point, so no need to do any electrical works. Apart from the fireplace, you’ll need to provide all other materials and equipment to build and frame etc.

Hey there, I’m looking for someone to remove this extended hearth and replace it with a smaller one. I will provide the updated hearth

Attach 2 copper pieces ( makes up a circle ) to go around copper chimney against the ceiling to cover gap between the plaster & the chimney above a copper hood fireplace. May need to trim edge of plaster. This is a Greenward copper hood fireplace.

Patch 2 large holes, paint wooden fireplace surround, hang door on pantry, remove curtain rail, paint and finish. I have paint

Looking for a brick layer. Need my brick fireplace reskinned (tied from existing bricks all the way around) currently chimney is approximately 1900x700 6800mm ffl. Red recycled will be supplied, will have quick stage scaffolding, walls and roof will be cut back as these are getting rebuilt anyway. Footing will be completed before hand

Need a fire place pained from pastel cream 2 pack paint to a gloss white paint 2 pack paint

The 1917 brick fireplace needs to be cleaned, repointed and partly filled in.

Need a Scandia Fireplace installed in the corner of a room, will need the flue to be going up through the joist above and through the upstairs bedroom up to the roof. Downstairs where the hearth is the picture with the clock

Our fireplace door has no glass on it, can't seem to find somewhere that can measure/cut/replace for us. Short of time I'm just scoping if anyone has the means to help us with this. Brand is Meridian.

I have a front loader washing machine that is not old. Has recently been working but giving errors. I also have two gas fireplaces that aren't working

Had a fireplace installed with a new wall, require it to be painted including skirting and a little bit of the roof . Wall is Approx wall 2700x1500 Already sanded Paint is provided and already on site ASAP is best

Complete Build including timber stud cavity wall unit for inbuilt firebox with zero clearance box and install unit including roof and flashing… image of similar provided below

hi, would like to install a new wood burning fireplace in the living room, I will purchase the unit, need your help to install it. please let me know your quote. thanks

Reinstate a fireplace that has been plastered over. Then install a wood fireplace. There is an existing chimney, but unsure if closed over/ or functional,

My client wants to replace a new fire place

Install a fireplace on the ground floor and through upstairs joists and bedroom to the roof

Sweep flue and chimney for gas fireplace. Gas fireplace was recently cleaned. Its a double storey house.

We have an ugly fireplace that is taking up a wall that we could use for something else. The hearth has been removed already but we need the mantel and brick surround dismantled/removed. Basically, we want it ready for a plasterer to come in and fill up the gap left behind. We don't believe it's load-bearing but aren't sure. If this is something you think you could do, we'd love to hear from you.

*open to budget* We have an ethanol fireplace. A carpeter created the frame for fireplace but it is out by 10mm in width and couple of mm internally. I need someone to come redo it (little touch up) full installation manual is provided and is pretty easy to do.