Find a local floorboard profesional in Outer East Melbourne

Have new (supplied) skirting boards that need to be cut and installed in a small bedroom

We attempted staining the sanded floorboards, it looked terrible. We've run out of time to sand the boards back again. We would also like the floorboards varnished too

Two timber floor boards need to be replaced. Total length is about 315 cm Width is 19cm. Colour match, provide similar finish and leveling with other floor boards Please quote for labour and material Thanks

Replace weather boards with new, I will provide weather boards On the left side , replace 6m long 8 pcs of weather boards, on the right side , replace 3m long , 8 pcs of weather boards.

Disposal of approximately 150 old damaged laminated floor boards. The board’s measurements are 1500mm X 200mm X 15mm. Some boards are cut into smaller pieces. They are stored at the front of our house.

Minor repairs, sand and polish, 3 x coats water based stain polished boards in kitchen, living room and stairs. Total area for sand and polish 46 m 2 (open plan) plus 1 story flight of stairs. Tiles and most of mastic removed, some fine layer of mastic remains in kitchen. 4 small holes need filling and/or repairing, several small surface chunks of timber came up when the tiles were pulledup and need to be repaired/filled with filler (resin). Two strips at either end of the dining room have pink filler that needs to removed. Gaps between boards need to be filled. Bay window currently has chipboard and needs to be replaced with matching floor boards. Staples in underside of stairs need removing. Possibility of a few staples or nails to be removed from floor but most should be removed now. Move and replace furniture before and after job to adjoining areas. Put throw covers over benches/kitchen items and bookshelf to prevent dust damage. Clean up and dispose offsite of any rubbish resulting. No changing the agreed price, this is a fixed budget and all details are accurate.

Pull up tiles in kitchen and scrap back tile adhesive from floor boards. Tiled area approx 3 m x 6 m . Edges adjoing hall and laundry remained tiled and will need to be finished cleanly with edging. Sand and polish, clear matt stain raw boards in kitchen and living room (prepped already). Total area for sand and polish , kitchen 3m x 6m plus living room 4m x 7 m (open plan). Also stairs need sand ,polish and clear matt stain.

Laying floorboards to 3 rooms, someone at home can help move the furniture

I have 3 carpeted bedrooms of below sizes (approximate). Carpets need to be removed and floorboards underneath polished , to make it a wooden floor Bedroom 1 - 4.0 x 3.6 Bedroom 2 - 2.9 x 3.4 Bedroom 3 - 2.9 x 3.0

Looking for somebody to purchase, cut to size and install a new skirting board. (No sanding/painting/corking required).

new built house need to install engineered floor board on concrete subfloor. need to glue the floor board. size 190cm x 19cm total 250sqm. can you give me price per sqm? my budget is 20 per sqm and I buy glue.

33 metres of skirting to be installed on the floor-boarded floor. Currently no skirting. Skirting can be provided.

Remove existing skirting boards from 4 bedrooms, ensuite and a hallway and install new skirting boards which is wider than the original. Also remove architrave from 7 doorways and 11 windows and replace with new wider architrave.

I have hybrid floating floorboards that need laying in a 6metre long x 820 wide hallway, and in front of a toilet area. Must have experience. I am a renter and dont have much money.

Replace 3 skirting boards in toilet Approx board length: 2 x 173 cm 1 x 85cm

Repair damaged floor in the kitchen

We need the existing old floorboards removed and disposed and replace the floor with waterproof floorboards. The area is similar to the size of 3 standard rooms. Area includes hallway open sitting area and a small office room.

About 5-10 square meters floorboards installed require 1.5x 5 m. Already have a Timber

Floating floorboard installation

Need assistance replacing a a patch of floor boards in our washroom. Only four boards need to be replaced, with few minor adjustments in other areas. We have spare boards too. It should be an 30-60 mins job for an experience trade. Please see photos for more details. Highlighted section in yellow needs to be replaced.