Find an experienced flooring expert in NSW

Need someone to lay supply & install vinyl flooring over kitchen floor tiles

Please Quote. the entire Level 1 and most of Ground level

Need floorboards to be installed in dining and kitchen area - please see photos and floor measurements. Kitchen area would be minus the bench area. Currently laminated, would like cheapest option floorboards so ok with hybrid floorboards. To match the other floorboards as much as it can. House is one storey, located in punchbowl Please provide quote for supply and labour

Lay a large mat on top of an existing carpet and stick it down with tape, which I have. Moving light furniture involved.

Install the provided flooring. Total area is 28m2 and the floor has been levelled already.

Easy job weekend after hours work whenever.... inside lay click clack vinyl hybrid flooring onto concrete. 2 bedrooms, little hallway into open plan kitchen/ living room Can be done anytime that suits you

Lino and glue supplied and old removed, need knife and rule to cut.

Need help to: 1) remove some furniture from lounge 2) lay underlay 3) lay engineered timber tongue in groove floating floor 4)if time allows hang a bathroom door Expectation would be less than a full days work.

Flooring has been completed through the whole apartment except the master bedroom. 4 of the boxes of flooring are gloss but the rest are matte (including everything installed) . I need to change the finish to mate so it all matches. It’s discontinued stock so I can’t just buy more boxes

Hey team just replaced the kitchen and want to lay hybrid floor boards over the vinyl that is currently down, it will just need the click hybrids from Bunnings anything else that you will need to do the job will need to be supplied by yourself

Hybrid flooring installation for hall way area (5sqm), 1 door shaving required. Materials including scotia and trims all provided

Need to install hybrid floor two bedroom around 20-25 sqm

I have 20sqm of engineered timber flooring that need to be installed. I have timber and underlay. Can you also pick up and deliver 2 extra boxes of flooring I bought from a warehouse in Macquarie Park. Can you supply skirting boards

Require someone to install hybrid flooring and skirting - Total area is 32m2 - Products will be ready at site. - Floor is level and all carpet nails and border fixtures have been removed. - 7mm Hybrid flooring - 66mm Skirting board - Can start: 10th Feb (next Monday) - Location: Canterbury

I need someone to install floorboards. I will buy all products- boards, underlay and skirting boards but need someone to do the installation (including leveling if needed) floor space is roughly 55 square meters

Needing install of hybrid vinyl floors

Quote must be just to install 27m of comparable or better carpet, removing existing carpet and taking away all rubbish. Carpet was already ordered by Harvey Norman Erina but we need an installer. INSTALL CARPET SPRINGDALE COLOUR FOUNTAIN MIST ON CARPET MATE 11mm PREMIUM UNDERLAY TO YOUR LOUNGE,DINING,LINEN,HALLWAY AND 2 BEDROOMS. ********************************** [PRICE INCLUDES] * INSTALL OF CARPET SPRINGDALE * INSTALL OF UNDERLAY CARPET MATE 11mm * INSTALLATION OF ABOVE * TAKE UP/AWAY OF EXISTING CARPET & UNDERLAY SPRINGDALE FOUNTAIN MIST Product Code ATW-BG UNDERLAY CARPET MATE PREMIUM Product Code 710080 11mm

I'm hosting an event on Sat evening. I wish to move furniture from my living room downstairs to my garage. Then lay carpet tiles on living room floor (I already have the carpet tiles) and assemble a dancefloor (I have this as well). Not a large area - about 40 sqm. At least a two-person job. Do not apply for the job if you are not a two-person team (or more). Probably suite removalist type work.

Install Vinyl floor in Kitchen - floor area approx 8sqm

Polish the timber floor

Sanding ,polishing,seal of 75m2 floorboards with satin water-based finish. This is the hallway/living and bedrooms. And 11m2 pull up vinyl tiles and refit with hybrid floorboards. The 11mr is over 2 area- the sunroom and small kitchen. Preferred start next week.

After renovation, clean and polish floorboards approximately 30 square meters longeroom

We need floorboards sanded and polished. We have 87m2 of pine floors. House was built in 1985. I'm looking for an estimate for someone to come in, sand the floors and refinish in a white tinted finish. The house will be empty.

Polish my garage floor. New concrete slab was poured 2 months ago. Burnished and smooth. 29 square meters total.

Quote for polished concrete flooring in large lounge room space (10x4meters)

Task Details: I need a professional to re-polish and seal the polished concrete floor in my café in Macquarie Park. The dining room floor has some scratches and areas with paint that need to be removed during the process. Requirements: • Experience with concrete polishing and sealing • Equipment and materials provided by you • Attention to detail to ensure a smooth and even finish Please comment with your experience and availability. Looking forward to your offers!

I’m after infills, pedicure and shellac nail polish finish.

Approx 36 square metres garage to lightly polish and make it more level on one small area.

Sand and polish floor boards

Need someone to clean a timber floor in a small restaurant

need someone to sand off glue, polish, lacquer and stain. 4.4m x 3.6m

Polish concrete floor in granny flat. 24m2. Slab was poured in November last year.

Scratches some sun damage ; plus small hall and small bedroom Approx 60mc Original floor boards Redgum?

We have ripped up some old Lino and would like to sand and polish the floorboards to match rest of house as best as can. Looking for someone to sand and polish this 2m x 3m area.

The timber is water stained and needs cleaning and polishing. It is a small area

Remove old floor, Supply & install new hardwood floor boards 1.5 by 1.9 meter (flooring Cypruss). Sand & 1 X coat the whole laundry room : 1.9 by 3.6 meters. Thanks

85 sqm of the timber floors. It needs repairs, punching nails, sanding, and polishing. Task price is sqm rate.

Polish scratches on floorboards so they are not visible. I believe they are timber with dark brown stain. See pictures

We have moved into a 60 year old single level house and want to remove the carpet in the lounge room, dining room, kitchen and hallway and get the original floorboards sanded and polished. There are also an extension that was completed that only has partial board underneath and we would need to add floorboards on top.

Kitchen area 5.5m × 2.5m & small pantry 1.4m x 1.7m

3 bedroom home cypris pine floor to be sanded and refinished. Either 70m2 or 35m2 depending on cost. I might carpet the bedrooms. Thank you.

I need my hardwood floor refinished. Existing floors top polished surfaces are wron out in some areas. Floor needs removal of old finish, and a new top coat. Total area 50sq. m 3x bed rooms 1x living room 1x hallway Please quote a price.

Job Description: I am looking for an experienced flooring professional to refinish my existing wooden floorboards. The boards are already exposed and ready for restoration. The job involves sanding, minor repairs, and applying a finish to give the floor a polished and professional look.

Remove wall-to-wall carpet and sand, finish, varnish wooden floors underneath. Two rooms (connected)

We have old lino floors in our kitchen which we want to remove and get back to the wood floor underneath. There is a rubber underlay under the lino which is stuck down. We aren’t removing our kitchen cabinets etc, so it’s really only a 12-15m2 space that needs to be completed. The floor will need to be sanded and refinished. I’ve also included a picture of another room where we had the floor refinished. The wood in the kitchen is the same as this.

I would like the kitchen floor boards to be refinished, the floorboards in the rest of the unit are in good condition - Due date: Before Saturday, 28 January 2023

We are re-doing our kitchen and have removed the floor tiles. There is original timber flooring through most of the kitchen, with some protruding nails. There is a small area (2sqm) with no existing flooring, but there are structural beam supports. Total kitchen area is approx 2mx4m. Looking for someone to sand and refinish the existing timber floors, and patch the existing hole in the floor. Open to suggestions around materials for the patch - could be laminate or timber - to match existing floor as much as possible. - Due date: Before Tuesday, 8 November 2022

Aged and damaged flooring needs refinishing, 90m2 - Due date: Flexible

Hi, we require installation of engineered floorboards (supply not required) in a large bedroom and staircase. Unsure of exact measurements, around 40m2. Would require removing skirting boards and existing carpet and refitting skirts. A second job is for sanding and painting these floorboards, and also sanding and painting exisiting engineered flooring in living/kitchen area (around 28m2). Thank you! - Due date: Flexible

I need an experienced floor sander to come on site and see if the existing floorboards have any remaining life left and if the floor could be sanded and refinished. I’m not sure if and how many times the previous owners have sanded it before. This task is for project scoping only.