Find an experienced garden edging expert in Inner South Melbourne

Garden edging needed. Some parts have old edging, others without. Very approx 90m worth of edging required. Pictures provided to show areas. Example of preferred edging pictured (thin) as it runs along driveway and is mainly there to stop leaves/mulch being flicked by birds. Any advice on what is most cost effective to achieve this look appreciated. Please separate quote for labour and supplies. Can answer any questions. Current price listed is labour only, does not include cost of garden edging (depends on material). Must dispose of old timber edging. Type of gardening: Other Size of garden: 50m²-100m² Has green waste bin: Yes

I would like to replace my current garden edging in my courtyard measuring approximately 5 meters with corrugated metal edging. I can remove the current edging and dig a small trench but need someone to install and peg the metal edging. I have the equipment to do this, just need the labour to do it! Type of gardening: Other Size of garden: Under 50m² Has green waste bin: No

Create small garden edge (approx 3meters) I have the materials, just labour required. Create garden edge where red lines in pic is. Use weed mat and then put stones on top. Thanks Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes

Task: Install rust garden edging Location: Bonbeach. Site: Residential backyard. Experience: Prior experience is a must. Installation length: Approx. 17 metres. Description: • Looking for someone to install rust garden edging in my backyard. • I purchased a rust garden edging kit from here: https://garden-supplies.com.au/rust-garden-edging/ • Edging, stakes, joins and screws all supplied. • I can also supply a hammer, grinder and drill set if needed. AirTasker encouraged to bring their own tools. Installation steps: • Dig out trench to desired pattern/design. • Bend the rust edging to fit/suit desired pattern. • Cut garden edging (if required) with grinder. • Sit the edging in the trench • Join edging pieces with joins and screws provided. • Install stakes to edging and hammer edging into the soil. Edging height, installation pattern design and area size: • Edging height 150mm - approx. 12m curved wave like pattern. • Edging height 100mm - approx. 5m straight line. • Both edging sizes to be connected as one continuous edge. Please see pictures attached for design layout (blue lines) and area. Should you have any questions please reach out.

labor required a few hours job to attach thin plastic garden edge x20m to timber, tidy up and move blue stone back,

I would like metal garden edging to replace my existing wooden edging. The metal is 5mm thick and I think it needs to be heated to be bent into the curved shape I am after. The total length is about 14m

Scrape existing dead turf and lay 12 sq meters

Garden edging - small courtyard. Appx 3.5 m in length x 3 m along black fence. To create a L shape garden bed. Prep work : it’s a clear surface. We can remove the grass or you can quote us to remove the grass. Depth of the bed should be around 75cm. You will need to install roughly 6.5m of edging. Or we can source it for you. Flexible with either option. I need formboss edging installed so I can create a bed for roses in winter. Type of gardening: Other Size of garden: Under 50m² Has green waste bin: No

As pictured, the edging of my garden bed on the side of my driveway needs to be redone properly. Make any reasonable offer to rectify including materials please. - Due date: Flexible

I want to use some stone veneers sheets I have to make garden edging Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes - Due date: Before Friday, 1 December 2023

Just ripped out a small section of garden edging (rocks and cement edging). Rocks aren’t huge and pieces of concrete edging are broken into manageable pieces. Need someone to come with a trailer, load it all up and take it away please. - Due date: Flexible

I want to use the stone veneer sheeting I have to make garden edging- so I need someone to construct a small brick wall (2 bricks high) and adhere the veneer to it. Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes - Due date: Before Friday, 1 December 2023

Only trim one long hedge at the back Type of gardening: Hedge trimming Size of garden: Under 50m² Has green waste bin: Yes - Due date: Flexible

We have weeded our garden and need all the waste removed - we also need the edges done as we don’t have the tools for that ! Type of gardening: Garden cleanup Size of garden: 50m²-100m² Has green waste bin: No - Due date: Before Friday, 1 September 2023

Remove and dispose of volcanic rock garden edge in our front yard. A large percentage have been concreted in and will need some elbow grease or Jack hammer or similar to remove. - Due date: Flexible

Adding some iron edging to our front and back gardens. One is short and straight and the front is a little curved. We can draw the line out for you. Type of gardening: Other Size of garden: 50m²-100m² Has green waste bin: Yes - Due date: Flexible

Approx 12 lineal metres of Shapescape edging to be installed. Area is prepared and ready. One corner. Needs to kept at height of concrete path which will be easy enough. All materials here ready to go. - Due date: Flexible

We need a new garden bed edge made with bricks (which we already have). Approx 12m of edge. Half already dug out. See pics, heavy rained on last night! Airtasker will need to provide concrete and sand New turf arriving in two days. Unsure how much this costs, so listing for lowest price to allow you to provide quotes. - Due date: Flexible

Hi, I need help with clearing weeds and garden edges in my backyard. May need some whipper snipping but no mowing of main area required.

I have some terracotta edges that I need installed along my driveway garden. They will need to be cut to fit. - Due date: Flexible