Find a professional gate installation in Adelaide

Heavy side gate has come off the hinges. may require redrilling and re screwing (you will have to supply the tools)

Double corrugated iron gate needs a lokk latch deluxe lock to be fitted

I need a Stratco gate installed. Have all the parts, gate and steel poles. It’s about 800 mm wide, and needs the pole bolted to concrete and then the gate latch on the brick wall on the other side. Or, could go in reverse: gate attached to the brick wall and the latch on the steel pole near the fence. No time waste is please, need someone qualified.

Instal 2 roof vents onto both ends of the house roof. Roof is corrugated metal. Old house, high roof but pitch standard.

Materials supplied to install side gate. Make and install gate as well as infill above garden bed using treated pine slats and timber… gate to be hinged on wall side and is approx 800 wide by 1200 high with approx 700 wide infill to retaining wall.

Looking for someone to give this gate a single coat of paint. I was planning to do it but have run out of time. It doesn’t need to be a perfect job, just enough to improve the look. No prep required. The job doesn’t require a experienced painter - in fact, it might be a waste of time for them! I did a similar size gate today and it took me about 90 mins. I will provide paintbrushes and paint. Just need to turn up and get it done. Note the location will probably be in the sun for most of the day tomorrow 😬 I’m afraid it does need to be done tomorrow (Thursday)

Hey professionals Our swing gates need a service to get them working perfectly. Both motors are working and so does magnetic locker. But recently they sometimes could not close properly and bounce back in the end of magnetic locker hookup . We need an experienced technician help to look into the automation and do a re-alignment service for us. The motor model is BFT- A Phobe 40 Please feel free to put on your offers. Thank you.

To replace the old one with a new one. I have the new latch. Please bring the tools. Redwood Park Adelaide

Remove shrubs as shown, install 1.8m post & rail colorbond fence alongside gravel driveway, install double steel gate across gravel driveway which can be secured and locked.

I am looking to replace the slat gate in my house with higher doors, I haven’t ordered the gate in case you can offer better price than online (I can consider both wooden or aluminium, let me know the price of your gate in the quote pls). Thx

Any experienced tradies out there who can construct two replacement gates. Need to take measurements but want approximately 5 ft high. Metal not wood and looking for sturdy. One gate also needs replacement post. Can neg after measurement.

automatic sliding gate not working properly . Suspect ground movement and the need to adjust the guides. Also gate leaning a little and not making proper closure due to this.

I have a small wooden gate with a peg, but it’s easy for someone to jump it. I’m needing it to be higher so I can padlock it the other side. I had some walk through the gate and steal a barbecue.a few weeks ago, which rattled me. I

I am looking for installation and supply of 2 sliding gates 5 meter wide and 1.2 meter high with electric motor .

Install an electronic automatic gate opener in Littlehampton SA. Product is Richmond Automatic Gate Opener For Single Swing Gates. Includes 2 x 12V 7Ah Batteries. AC wiring must be installed by a qualified electrician.

Hi, I have a double swing arm gate opener kit and need them installed ( including power supply ) for my driveway entry gate. 1) https://www.bunnings.com.au/richmond-automatic-gate-opener-for-double-swing-gates-double-arm_p3962443 Please only bid if you have experience installing automatic gate opener for double swing gate. Thanks! Regards, Siva

Assembly and install of a stratco ezi-slat carport gate with self latching walk through gate on one side. Will need to cement in three posts, cut blades (just a single cut for each) and put it all together. All stratco parts and fasteners are ready and on site. Images are of the space between the house and the property line fence where it will be installed with the gate drawn roughly in blue and fence posts in red and of a similar example of what it will look like from the internet. Space is 3.6m wide and gate will be 1.2m high. You'll need your own insurance and all tools and materials outside of what stratco provided. Soil is rock and clay.

Wireless keypad was knocked off gate and needs to be reinstalled

The task expired so this is a repost for Jamie B so I can book him. “I have 2 of these double swing arm solar gate opener kits https://www.mytopia.com.au/e-guard-automatic-solar-electric-gate-opener-double-swing-arm-kit-3x-remote-controllers?srsltid=AfmBOoo3AaRkP1k7X6Kc2KhH2tkxuuMCg1bF2upcoiIHnwF0-XZNsOEX and need them installed on our new picket gates for our 2 driveway entries. Please only bid if you have experience installing automatic solar gate kits.”

Side gate dynabolt x2 has come loose and wont screw back in causing the gate to be loose.