Find a professional gate installation in Brisbane Market

- Remove existing fence gates - repair wall and building sections with old gates - supply and install Colorbond gates 1 single gate & 1 double gate

1st gate - see picture Current_installed_gate_1st.jpg Total dimension: total width 332cm ,height 180cm. Brick wall on both sides. 1 double gate - total width about 2.5m x 1.8m (2 x STRATCO supplied aluminum screen 1m x 1.8m) 1 single gate - about 1m x 1.8m (1 x STRATCO supplied aluminum screen 1m x 1.8m) All parts/materials supplied including posts, hinges, latches 2nd gate - see picture Current_installed_gate_2nd.jpg Total dimension: total width about 1.4m 1 single gate STRATCO supplied alluminim screen 1m x 1.8m Color bond sheet padding on left over retain wall 0.4m x 1.8m Total of 4 Quick Screen kits to be installed - all 1.0 x 1.8m

1. Install a side-gate between driveway and fence to keep a dog in. Looking for something like the example picture. Also attached are photos of the eventual gate location. Measurements: Width 220cm Height: 134 right, 127 left 2. Dog proofing 19m of adjoining fence. Open to ideas on both.

I need 2 baby gates installed please

Need an electrician or gate technician to repair a damage cable for electric sliding remote controlled gate. - Due date: Flexible

I need my side gate replaced. Preferably steel and is weather resistant. Current gate is made of wood and gets damaged when there is a storm due to it catching a lot of the wind. - Due date: Flexible

i wooden gate with lockable 1.8 m high 1. 5 m wide and the same measurement aluminum gate. both are lockable. aluminum gate is 2 locks and wooden gate is 1 lock. Install as soon as possible... supply and install. - Due date: Before Sunday, 28 May 2023

Hi, We have a rolling metal gate at front of house. There are a few issues that we would like fixed: 1. The remote has stopped working - battery may have no charge, and may need a replacement. Not sure 2. When the remote stopped working, I started to push and pull the gate manually to operate it. That broke one of the wheels - that is, it came off the main gate. The wheel itself is good, just needs to be fixed back in the gate 3. The gate has metal vertical rods, and has a thin metal sheet riveted into the rods. A lot of rivets have come off, and need to be re-riveted We are in Fig Tree Pocket. Would you be able to fix it? What would be approximate charges? Thanks, Satinder - Due date: Flexible

The side gate to our fence is broken and has come off the hinges and needs to be repaired. - Due date: Flexible

Need a gate (1450mm wide 1200mm high) for a side path in my property. Photos of the path attached.

Need 2 x side gates supplied and installed to each side of my house , so that my dog can stay safely in the back yard. Approx 2m wide x 1 m h. Not fussed on type of material used but needs to be effective in keeping the dog safe and providing reliable access between front and back yards. - Due date: Needs to be done on Wednesday, 21 September 2022

Fix pool fence / gate - Hinges need to be min 900mm apart - right hand side post is loose (I assume it needs to be fixed to the wall to make it stable) - self closing mechanism needs to be checked

My side fence is approx 1.8m high in timber. There is a 1.8m pool gate with soft close hinges and matching posts for it. It was completely submerged under flood waters. It was working beautifully, but now since the floods the gate is lower and a little wonky and needs some finessing by someone experienced with pool gates and fencing. I'd suggest around an hour of your time to potentially re-mount the gate (the latch on the other post is adjustable, so it is okay, it is really the gate that needs to be lifted in position so it doesn't hit on the ground). - Due date: Before Thursday, 31 March 2022

A part of the supporting beams on our queen bed is bowing, which is making the slats fall off. Need to screw in and possibly reinforce the beam? (Dodgy drawing below) Also have a roller blind to hang. Need an external gate looked at, it is out of alignment (latch won’t close- gate only 12 months old) Available for the job to be completed Friday 28, Monday 31, Friday 4th or weekends. Thanks

Install 2 x retractable baby gates which will require careful fixing to the wall, images attached showing location gates are to be fixed and sample image showing how I’d like them attached. - Due date: Needs to be done on Sunday, 17th Oct 2021

Fix my pool gate please so it shuts properly all the time and latches every time. I have the extra magna latch soft close mechanism hinge too if this should be fitted in place of one of the other two hinges. (and some other hinges).

I need a handyman/plumber/electrician who can supply and install an automatic double swing gate which can be opened outward for my driveway. If a solar motor for the gate is not possible, a manual gate should be all right. The width is 3-3.5m, the height is 1.8m. Price is just an estimate so you are welcome to give me your offer.

Looking for an experienced qualified tradesman (carpentry) with own tools and insurance to do small job on the 19/09/21. 1. Wooden Gate (900mm x 1200mm) to be installed side of house. Wooden gate must be sturdy, self-closing, self-latching and open inwards. (See photo attached) space between house and retainer wall 950mm. 2. Wooden Fence to be installed 1900mm x 1200mm. To be secure and sturdy. (See Photo Attached). I will pay for the materials needed to complete the job via Bunnings.

Circuit board short circuited

when remotely closing the gate had a spark in the unit .