Find a professional gate installation in Brunswick East

Locksmith required to look at current code lock is jammed and bolt wont come out. Will require a fix to the code lock Suspected cause is the striker is too far from the install insert to move striker closer to gate

Hi, we need someone to remove 3 wooden posts from our gate, remove the hardware and water hose from the posts, and remove 5 pieces of hardware from the house. I have tried removing these with a power drill and WD40 but haven’t been able to. Thank you for considering!

Metal gate is collapsing because posts are not long enough or deep enough into the ground. Old posts need to be replaced with longer posts. New posts and gate need to be reinstalled into a new concrete footing

Seeking a gate and installation for an area approximately 2.5 meters wide. The locking mechanism needs to include a push button code for easy access by multiple users.

Auto gate has stopped working. It appears that it requires remote re-tuning.

Hello we need a number of small jobs done on our house. Please see the list below (and images for reference): - Front door look is stiff - Lounge room door only works from one side - Studio door doesn't lock properly - Attach new letterbox to the fence - Install our new smoke alarm

I need a digital lock installed on this gate. Something like this, with a code to get in https://www.bunnings.com.au/lane-black-digital-gate-lock_p4200057 Or https://www.bunnings.com.au/ikonic-satin-chrome-digital-lever-entry-lock_p0223203 Anything else?

I need a smart/code lock on my gate. I can supply the lock if you help me pick the right one.

I’m have 7 corrugated Perspex sheets which need to be bolted to the underside of a pergola and the roof of the rear of my house. I have all the sheets and bolts. Some bolts are already screwed in to the roof in the wrong place and would need to be removed and reconnected. The cross beam of the pergola runs parallel to the rear of the house and the corrugated sheets need to be connected at one end to the house and then at the other end to the cross beam of the pergola.

One of the planks on our front gate has come a bit loose from the frame and sitting a bit lower than it used to. It’s now catching on the pavers in two spots. - Due date: Before Friday, 22 December 2023

Investigate and fix rising damp - Due date: Before Sunday, 8 January 2023

I need our metal gate to have a metal loops welded onto it so we can padlock our gate. Images and measurements attached for your reference. Can be done any day this week but sooner preferred. Thanks so much.

steel gate post has sagged because concrete footing (embedded in soil) is not deep/strong enough. needs to be dug out, old concrete footing removed, hole dug deeper, new concrete poured in, gate reposition/reset - Due date: Flexible

The gate to the community garden was removed and posts removed to allow access. Now needs posts re concreted in and gate repaired. See pics. This is a community garden with limited funds.

My gate is out of alignment and doesn’t close. See photos for details.

Seeking a contractor that can build a gate at the back of a set of townhouses based on architectural designs (have been checked by an engineer). Requires some skill, technical ability and identifying and sourcing all materials. See designs and space in photo. - Due date: Flexible

Just got these new gates installed. The wood is already primed and I have plenty of leftover paint to match the existing fence. The metal will need a coat of galvanised primer which I can buy (if you already have then I won't) and then we need 2 coats of the black. Gates measure 3100mm wide and 750 wide. Both about a metre high.