Find a professional gate installation in Dalkeith

The gate is not closing unless manually pushed closed due to its poor alignment - the top part of the gate is getting caught preventing it from closing. In the photos, you can see where it is rubbing up tightly along the latch - white scuff marks. The tension is fine as it moves towards closing and the self latch system will work once the gate is pushed in to a closed position. Need repaired as soon as possible. Please reply if you confidently know you can fix it. Thanks

A piece of old timber on the side gate has broken off and in doing so the latch is also dislodged as the timber is old.

Our very heavy gate has come off the rails. We need at least three, but maybe even four, people to lift it back onto the rail.

I need someone to remove the metal bracket /arm from a wooden gate.

The job involves adjusting a self-closing gate that is an entry gate to a swimming pool. The gate is timber and therefore pinches and swells a bit. Needs adjusting to ensure it closes properly and meets regulations

Electric gate requiring service

Pool gate opening/closing mechanism at the base of the gate needs replacing.

Two pool gates that need their spring fixed - Due date: Before Wednesday, 6 December 2023

To fix a self closing gate that isn’t self closing - Due date: Before Tuesday, 24 October 2023

I have a few pool gates that need adjusting and fixing - glass and wooden. The do not shut automatically, and one of the gates locks is broken. - Due date: Before Monday, 25 September 2023

Need the current gate lock changed out for another one I already have. Will need to disconnect the current wires into the existing lock and reconnect them into the new lock (electrically powered lock). - Due date: Flexible

An old pull up latch auto close gate not auto closing, had a wheel at bottom of gate, now missing. Needs to be made compliant. Could be repaired or have new magnetic latch fitted. - Due date: Before Friday, 24th Dec 2021

Old style aluminium pool gate. Pull up latch with roller ball at base to self close, fails to close, will stay propped open and does not roll freely to click into plate. Does not meet safety requirements. - Due date: Flexible

My gate springs need to be tightened - Due date: Needs to be done on Sunday, 12th Dec 2021