Find a professional gate installation in Dover Heights

Our two gates need a fix. First gate needs wood decoration re attached Second gate needs a self closing mechanism attached on top

Single aluminium picket (see photo) needs to be welded back in place.

I need a damaged 3mm piece of sheet that's been welded on a piece of flatbar cut off and a new piece rewelded. The new piece of sheet which will be 3mm thick has to be about 200x100 to suit the gate post so it can be teck screwed back into the post(it's the bottom hinge which is holding up a gate that's cracked off. Or you can always go out on site and repair it and weld it into position again. It is Aly as you would notice. This job is for next week....

Attach metal gate post securely to brick wall. No materials supplied. We live close to the sea so screws must be rust proof.

Replace mags latch on glass pool fence

During extreme weather we have issues with our gate closing / locking. After the recent rains it won’t close (without jamming) and the lock broke when we tried to force it open. We need someone to repair this.

Aluminium hinge has snapped and needs to be welded (?) back on or otherwise reattached to the gate post - Due date: Flexible

The holding screws on Brevattato lock have corroded and the lock became detached from gate. Need the lock to be replaced on gate and adjusted. Tradesman with previous experience with Brevattato required. - Due date: Flexible

Repair the pool gate hinge so that it swings shut automatically. - Due date: Flexible

Strip veneer at the bottom of gate (under bottom horizontal piece) replace veneer - Due date: Flexible

Install a pressure mounted baby gate, in the door frame It doesn’t seem to be lining up correctly, Need someone with experience as this should be pretty simple - Due date: Needs to be done on Friday, 30 June 2023

Electric gates not opening or closing properly. One side only opens three quarters - Due date: Flexible

New gal gate needs undercoat and top coat Approx 2000 mm wide x 2100 mm high - Due date: Before Saturday, 25 February 2023

Need someone to sand and paint this security gate (and gating on the side) and re-install the flyscreen mesh. Price is to include paint and materials. - Due date: Flexible

I require a slim timber gate to be installed in my garden approx 700mm wide x 800mm high. - Due date: Flexible

A front gate has been damaged by our dog. It needs sanding down and re painted - Due date: Flexible

Pool safety gate does not close smoothly - it slams shut and does not lock - Due date: Flexible

Two new outdoor doors/ gates, to be constructed of 90mm H3 pine decking board or similar, all 316 stainless fasteners, heavy duty hot-dip galvanised hinges and lock bolts. Each door 1800H x 800W. Boards to be set 2-3mm gaps when dry. Similar construction style as pictured. Refer drawing for dimensions/ installation. New post installed, ready to go. refer attached photo of location of install. Email me for photos - Due date: Before Friday, 4th Feb 2022

Pool door is not closing properly - Due date: Flexible

The hinges on the top and bottom have pulled away from the wooden side pillar(post). The latch has also broken off